Grips for Davis Derringers, Lorcin autoloaders, and other handguns now produced by Cobra.

A number of relatively inexpensive handguns produced under other names are now owned by Cobra. Also, some of the Davis or Cobra Derringer grips may fit brands exported under various trade names from German, Spanish or Belgian manufacturers. Most of these grips are attached using a separate screw for each grip panel, which threads into a hole in the gun frame. You will need to use the screws which came on your gun, or if these are not present, have a gunsmith determine the thread pitch and size and order proper screws from the manufacturer or from a gunsmith supply house such as Brownells. The Tombstone grip mounting kits are designed for guns which use a single screw through the frame, clamping both grips with a single screw. In some cases, you may be able to use a single screw mounting, but the location must clear any frame parts and the hammer spring, and a hole must be present (or you must drill one) through the frame.

There are so many variations of Derringers that it is impossible to know if any certain one would work with any of these grips without getting a tracing from around your grips, or to tell which ones might be able to use a single screw instead of the original two, without actually examining the gun. But you can tell, because you have the gun. Just remove the grips and take a look. If there is a location where a single screw could pass through and not interfere with anything, then you can trace around your existing grips on a piece of stiff paper and indicate where the mounting screw should be located. It does not necessarily have to be the original location, unless the two screw holes are aligned so you can see through them both.

Sort By: Default Name Ascending Name Descending Code Ascending Code Descending Lowest Price Highest Price Newest Items

Davis/Cobra Derringer, C22CP (53b) Code: Cobra_53b Price: $68.00 Quantity in Basket: none

Davis/Cobra Derringer (24a) Code: Cobra_24a Price: $68.00 Quantity in Basket: none

Cobra Derringer Smooth (154b) Code: Cobra_154b Price: $68.00 Quantity in Basket: none

Davis/Cobra Derringer stag (131e) Code: Cobra_131e Price: $75.00 Quantity in Basket: none

Lorcin factory (84c) Code: Lorcin_84c Price: $68.00 Quantity in Basket: none

Lorcin Smooth (75a) Code: Lorcin_75a Price: $68.00 Quantity in Basket: none

Cobra Derringer w/notch top (89d) Code: Cobra_89d Price: $68.00 Quantity in Basket: none

Cobra Derringer Large (38e) Code: Cobra_38e Price: $68.00 Quantity in Basket: none

Cobra/Davis C22CP smooth (123d) Code: Cobra_123d Price: $68.00 Quantity in Basket: none

Bryco Model 38 Smooth (78c) Code: Bryco_78c Price: $68.00 Quantity in Basket: none

Generic Derringer Blank (151b) Code: Generic_151b Price: $38.00 Quantity in Basket: none

Davis/Cobra Derringer C22 CP smooth Code: Cobra_44g Price: $68.00 Quantity in Basket: none