Generic Derringer Blank (151b)
	Quantity in Basket: None Code: Generic_151b Price: $38.00 Shipping Weight: 0.20 pounds
	Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default) : Select a pearl color below... (otherwise, Ivory) Pure White Natural Ivory (Base Price) Aged Ivory Extra Aged Ivory Dark Yellow Yellow Military Tan Walnut Brown WW II 1911 brown Light Grey Dark Grey Ebony black Light Green Green "Zombie" green Olive Pale Blue Blue Royal Blue Violet Light Violet Maroon Magenta Light Pink Hot Pink Red Tangerene Orange Send ANY color in stock (save $$) Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice) : None: Use solid color, above (default = Ivory) White Pearl Antique Pearl (aged/yellowed white pearl) Grey Pearl Gold Pearl Aztec Gold Tiger Stripe Gold Sparkle Gold Yellow Pearl Green Pearl Jade green (darker and less transparent than green pearl) Blue Pearl Flamingo Pearl Pink Pearl Red Pearl Russet Pearl Amethyst purple Violet Pearl Blue Opal Black Opal Australian (White) Opal Pink Opal Mexican (Red) Opal Amber Burl Light Amber Pearl Walnut Burl Cappuccino Pearl Bronze (metallic) Copper (metallic) Sparkle Copper Silver Pearl Antique Silver Sparkle Silver Send ANY color available now (Save $$) Optional note:
	Quantity:
This generic derringer grip blank set consists of smooth left and right panels with no screw holes. It is offered for folks whowish to make their own grip, starting with a close set ofblanks. This grip set might be used on a Bond, Cobra, Davis, or any of dozens of other brands and foreign makes,provided the gun is about the right shape and is smaller than the grip blank. This is a kind of "if all else fails" package. I use it when someone sends a tracing that is just a little larger than my closest "finished" grip mold, andjust sand the shape and size (and thickness) to suit. Here are the dimensions: (A) width across top = 1.05 inch (B) width across center = 1.05 inch (C) Height = 2.0 inch Distance from point (a) to point (b) = greatest span, 2.15 inch Thickness at center = 0.40 inch Please note that you can make these as thin as you wish, by sanding from the back (which reduces side-to-side sizealso) or from the rounded front (which leave the side-to-sidesize the same). Some guns use grips with a raised center on the back, to drop into a cut-out in the frame. You can simulate thisvery easily by marking on the back of the grip, throughthe frame, to determine the position and size relative tothe grip. Then simply epoxy glue three small, thin blocksto the back so they form three snug points of contact withthe inside of the grip frame cut-out. It is not necessaryto route the entire frame, all around. Any three points willkeep it from turning, if they are about equally distant.Or, you can mark three points and drill small holes partway into the back, and then press-fit three short brads orsmooth finish nails into the holes. Cut them off so onlyan amount the thickness of the frame projects. The famousFitz grip company used this technique for a variety ofguns. This is a generic blank, which you can order for fittingand finishing, yourself. I cannot put the screw holesin it because I don't know where you want them. Somederringers use two separate screws threaded into theframe. Some use a single screw through the frame. You can order a separate screw of your choice in the"hardware" section if you need one.

Related Item(s)

Code	Name	Price	Availability
Cobra_53b	Davis/Cobra Derringer, C22CP (53b)	$68.00
Cobra_24a	Davis/Cobra Derringer (24a)	$68.00
Buddie_120a	Buddie Derringer (120a)	$68.00
No4Kit	4-40 Screw Kit	$3.00
No2Kit	2-56 Screw Kit	$3.00
Buddie_153b	Buddie Derringer Smooth (153b)	$68.00
RECK_153c	RECK Derringer Smooth (153c)	$68.00
Cobra_154b	Cobra Derringer Smooth (154b)	$68.00
Bond_80a	Bond Derringer (80a)	$68.00
Cobra_131e	Davis/Cobra Derringer stag (131e)	$75.00
Cobra_89d	Cobra Derringer w/notch top (89d)	$68.00
Cobra_38e	Cobra Derringer Large (38e)	$68.00
Schmidt_135d	Hy Hunter Derringer Smooth	$68.00