|
Colt SAA (1873) Steer Head (94b)
|
|
|
Quantity in Basket:
None
Code: Colt_94b
Price: $68.00
Shipping Weight: 0.25 pounds
|
|
This set of grips can be ordered with or without screw holes. If you
order without, I'll assume it is a one-piece grip and send
spacer kit with it. If you order with screw holes, I'll install
the mounting hardware for you and include it with the grip.
This fits most of the replica Colt Single Action Army grip
frames such as Uberti and Pietta 1973 models. It is slightly
longer at the top and bottom so you can sand it for a perfect
fit. Be sure to compare your grip frame to the dimensions,
however, to make sure it will work:
Here are the dimensions (refer to diagram below for
letters a-b-c-d):
- Height of grips measured at 90-degrees to the base = 3-1/16 inches (B)
- Width across the base = 2-1/4 inches (C)
- Width across grips, parallel to base, at 1-5/16 from base = 1-9/16 inches
- Width across the front vertical top edge = 15/16 inch (A)
- Width across the flat top section = 1 inch
- Width from the mid-point of the front vertical top edge straight back (parallel to base) to curved rear edge = 1-5/8 inches (D)
There will be some final fitting neccessary. The average
time you will spend fitting will depend on your skill
level, but is about one half hour total.
These grips have a steer head on the right panel only,
and a smooth panel on the left side. This is similar to
the "Tom Threepersons" style of grip, in which the
right-handed shooter has a better fit because the steer
head fills more of the hollow of his palm. I do not
claim that this is an exact copy of the famous
"Threepersons" grip. It is similar in style and
function.
Please do not fail to notice, before buying, that the
left grip is smooth, and the right grip has the
steer head! I don't have a reversed version for
left handers at this time, sorry!
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_56a
|
Colt SAA Factory w/Eagle (56a)
|
$68.00
|
|
Colt_129b
|
Colt SAA Stag 2pc (129b)
|
$75.00
|
|
Colt_28d
|
Colt Frontier SAA Stag (28d)
|
$75.00
|
|
Colt_91a
|
Colt SAA 1873 Smooth (91a)
|
$68.00
|
|
Colt_119a
|
Colt SAA Stag 1-piece (119a)
|
$75.00
|
|
Colt_56d
|
Colt SAA wide throat (56d)
|
$68.00
|
|
Colt_28F
|
Colt Frontier SAA Stag, Larger (28F)
|
$75.00
|
|
Colt_112c
|
Colt Cowboy SAA (112c)
|
$68.00
|
|
Colt_64e
|
Colt/Uberti SAA 1-pc (64e)
|
$68.00
|
|
Colt_143d
|
Colt 1873 Pietta Smooth (143d)
|
$68.00
|
|
Colt_119d
|
Colt 1873 SAA Smooth (119d)
|
$68.00
|
|
|