Tombstone Gun Grip Kits: - - Email: - - Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503

****** Flat rate shipping, all items on one order: Within USA, $11. Out of country, $45. ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

A.J. Ordnance
American Arms
Colt and Colt Replicas
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Herbert Schmidt
Smith & Wesson
Sterling Arms
Other Manufacturers
Western Style Revolvers
Small Pocket Autos
Break Top Revolvers
Other Automatics
Other Double Actions
Grip Caps
Butt Plates
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware

Colt/EMF Bisley Smooth (7D)
Colt/EMF Bisley Smooth (7D) Quantity in Basket: None
Code: Colt_7D
Price: $58.00
Shipping Weight: 0.25 pounds
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

Add a medallion ($14/pr)

Select mounting style:
Two panels with screw mount
No screw, send kit for 1-piece grip
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
Optional note:
This is a set of Bisley Colt style grips made for one of the examples of a clone imported by EMF, probably made by Pietta.

This illustration shows the "white pearl" effect, which is an option on the above drop-down menu choices. The default is natural ivory (base price).

natural ivory As with nearly every clone or replica or "similar-to" version of nearly any Colt revolver, if you don't send a tracing, it's impossible to guess if your gun has the same curves, widths and heights of grip as the one shown. You can check the measurements and probably tell from that. But if you make a good tracing, as described elsewhere on this website, and send it with the order number written on it, your odds of getting a grip that actually fits your gun go up by a huge factor.

This grip can be provided as a 1-piece kit with a spacer that you glue to the backside after fitting to your gun, or it can be provided as a 2-piece set of panels with the mounting screw kit, as you wish. Default is the screw kit. I install that for you. You don't have to buy it separately or pay anything for installation. If you order the 1-piece kit, then I'll send you a spacer and also send the screw kit but not put any holes in the grips. You can do that if you change your mind after you get the grips. I send instructions with the screw kit.

Please note that if you send a tracing AND mark the screw hole location, then I can match it exactly. If you do not send a tracing, all I can do is use the hole location which happened to be right for the one gun these grips were created to fit originally, the model or sample. If that happens to be right for your example of the same gun, good for you. If your gun has the hammer spring located slightly off from the one I used, well, you should have sent a tracing showing me where to put the screw holes!

I wish every manufacturer would always use precisely the same grip frame shape, size, and hole location on every gun they make for the same model number. Too bad they don't. They tend to make little changes and not change the model number. Fortunately, a postage stamp and a couple of 3 x 5 index cards with a pencil outline of your existing grips or the grip frame will solve that problem.

But if you want to pre-check the size, here it is:
  • Front edge (straight part) = 1.1 inches
  • Flat at the top = 0.7 inches
  • Distance from middle of straight part of front to rear edge = 1.95 inches
  • Overall heigth of the grip = 3.7 inches
  • Height of the round notch (from top to start of straight front edge) = 0.4 inches
  • Width across narrow "neck" of the grip = 1.2 inches
  • Width across the bottom of the grip = 2.1 inches
  • Thickness of the grip when you get it = about 0.4 inches
aged ivory You can adjust thickness by sanding against a flat board with a piece of 220 grit abrasive paper wrapped around it. The edges can be shaped a little to fit your gun with a standard fingernail sanding board available at cosmetic counters.

Related Item(s)
Code Name Price Availability  
Ruger_100a Ruger Bisley Smooth (100a) $58.00  
Colt_67b Colt/Uberti Bisley, Smaller (67b) $58.00  
Ruger_30a Ruger Bisley, Fancy (30a) $58.00  
Ruger_100b Ruger Bisley Smooth OS (100b) $58.00  
Colt_67e Colt./Uberti Bisley, Larger (67e) $58.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 90 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!

Home Page Colors Pearl effects Example Guns