Tombstone Gun Grip Kits: - - Email: - - Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503

****** Flat rate shipping for all items on the same order! USA +$15, International +$48 ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Screws,  Mounting Hardware
Blank Rectangles, Spacers, & Grips
A.J. Ordnance
American Arms
Colt and Colt Replicas
1911 Grips
Colt Single Action
Colt Double Action
Colt, other types
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Herbert Schmidt
Smith & Wesson
Sterling Arms
Other Manufacturers
Grip Caps
Butt Plates

Colt/Uberti SAA 1-pc (64e)
Colt/Uberti SAA 1-pc (64e) Quantity in Basket: None
Code: Colt_64e
Price: $58.00
Shipping Weight: 0.25 pounds
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

Add a medallion ($14/pr):
Select mounting style:
1-piece kit w/spacer
2 panels w/screw
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
Optional note:
This is a 3-part kit to make a 1-piece grip, to fit certain versions of the Uberti "Colt SAA Clone" revolvers. It may also fit other brands of Single Action Army style guns. The kit consists of two grip panels and a curved spacer. First you sand the grip panels to perfect fit with your frame, and then you align one panel and epoxy glue the spacer to the back. After the epoxy cures, you align and glue the other panel to the spacer.

This style of grip requires a gun with removable back strap. Rugers and solid grip frame Colt copies will NOT work with this style. However, you CAN select this grip to be sent with a screw kit installed, as a 2-piece grip set. In that case, the spacer would be replaced by a screw mount kit. The grips could then be installed on either kind of grip frame.

Be SURE to compare all the measurements with your own gun and do NOT simply rely on the name. Guns even of the same make and model will vary with production runs, so the same make and model might use slightly different size or shape grips. To have a guarantee that the grips will be large enough for proper fitting, send a pencil tracing (see TRACING for details.)

SAA Grip diagram
  • Front edge length (A) = 1 inch
  • Overall height (B) = 3.1 inches
  • Base width (C) = 2.2 inches
  • Center of front edge to rear edge (D) = 1.9 inches
  • Width of top flat (E) = 1.18 inches
  • Thickness near top edge = 0.3 inches
  • Thickness near base, center area = 0.5 inches

If you select the 2-piece kit with screw mount, be SURE to send a tracing with the screw hole indicated. Otherwise if I must guess and use the average Colt S.A.A. screw location, it may or may not match your gun... the various hammer spring and frame bracing locations in different clones will not always allow a screw to pass through in the same location as a similar gun. A tracing solves so many problems that I've often been tempted to require one in order to accept the order, because I don't like to send grips that won't fit, and I have no other good way to tell about your particular gun's tolerances. But you have the option to take the risk for yourself, if you wish to avoid sending a tracing. If you do send one, I can guarantee the grip will be large enough to be sanded properly for fit. If you don't, I can only send what you order.

Related Item(s)
Code Name Price Availability  
Colt_81c Colt Generic 3-pc SA Smaller (81c) $58.00  
Colt_56a Colt SAA Factory w/Eagle (56a) $58.00  
Colt_94b Colt SAA (1873) Steer Head (94b) $58.00  
Colt_116a Colt 1873 Checkered (116a) $58.00  
Colt_129b Colt SAA Stag 2pc (129b) $65.00  
Colt_129a Uberti Regulator 3pc (129a) $58.00  
Colt_28d Colt Frontier SAA Stag (28d) $65.00  
Colt_57a Colt Generic 3-pc SA Larger (57a) $58.00  
Colt_91a Colt SAA 1873 Smooth (91a) $58.00  
Colt_78a Colt Generic 3-pc SA Thick (78a) $58.00  
spacer1 Colt Single Action Spacer $2.00  
Colt_27a Colt Frontier Scout/Logo (27a) $58.00  
Colt_45b FIE Texican 2pc smooth (45b) $58.00  
Colt_143a Colt 1873 Smooth, Thin 3-pc (143a) $58.00  
Colt_119a Colt SAA Stag 1-piece (119a) $65.00  
Colt_151a Generic Colt SA Blanks (151a) $38.00  
Colt_56d Colt SAA wide throat (56d) $58.00  
Colt_28F Colt Frontier SAA Stag, Larger (28F) $65.00  
Colt_3F Uberti Cattleman 1-pc (3F) $58.00  
Colt_112c Colt Cowboy SAA (112c) $58.00  
Colt_112e Colt Cowboy Smooth (112e) $58.00  
Colt_1D Uberti Cattleman Stag (1D) $65.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 45-60 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!

Home Page Colors Pearl effects Example Guns