|
Colt 1911 Stag (148a)
|
|
|
Quantity in Basket:
None
Code: Colt_148a
Price: $75.00
Shipping Weight: 0.20 pounds
|
|
These Colt 1911 grips fit all the guns that have similar
grip size to the Colt 1911, including Taurus 1911, S&W 1911,
and the full size Kimbers, Springfield Armory, and other
brands. If your gun has two mounting holes on the grips,
about 3-1/16 inch apart, then the odds are very good this grip
will fit.
If your gun has 2-5/8 inch spacing between centers of the
mounting holes, then you need the "compact" model grips.
The maximum centerline height of the grips is 4.25 inches,
and the base is cut without a slope, so that it will look
good with extended magazine wells. Both top rear corners
are relieved for ambidextrous safety levers, although you
may need to make further relief with a small file depending
on the particular gun or after-market safety.
The width across the bottom screw hole is 1.6 inches. The
width across the top screw hole is 1.3 inches. The top
screw hole is 0.6 inches from the top of the grip, and
the bottom hole is .65 inches up from the base.
This grip is slightly larger (wider, longer) than the
conventional grip but it fits the same, just covers more
metal. You can sand it smaller if you wish.
The lines on the grip are deeply carved, with the colors
molded in rather than painted on. They wear well, and act
similar to checkering in keeping the gun from slipping in
your hand.
These grips are about 1/4-inch thick and can be sanded to
make them thinner, if you really want to. Just use contact
cememt to glue a piece of sandpaper to a piece of board,
and rub the grip back in circles against the sandpaper until
you achieve desired thickness. You may need to deepen the
1/4-inch diameter mounting post holes or use shorter mounting
posts on the gun, and lightly angle the hole edges to clear
any bulge at the base of the post. It's well within the
capabilities of the average 12 year old, given a little
instruction.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt1911_21a
|
Colt 1911 Dragon (21a)
|
$68.00
|
|
Colt1911_16a
|
Colt 1911 Smooth (16a)
|
$68.00
|
|
Colt1911_90b
|
Colt 1911 Eagle (90b)
|
$68.00
|
|
Colt1911_90a
|
Colt 1911 Factory check (90a)
|
$68.00
|
|
Colt1911_2a
|
Colt 1911 Triple Diamond (2a)
|
$68.00
|
|
Colt_18a
|
Colt 1911 Woodgrain (18a)
|
$68.00
|
|
Colt_7a
|
Colt 1911 Dbl Diamond. No Logo (7a)
|
$68.00
|
|
Colt_7b
|
Colt 1911 Double Diam. w/logo (7b)
|
$68.00
|
|
Colt_38b
|
Colt 1911 Thumb Rest (38b)
|
$68.00
|
|
Colt_17b
|
Colt 1911 Checkered (17b)
|
$68.00
|
|
Colt_147a
|
Colt 1911 smooth oversize (147a)
|
$68.00
|
|
|