|
Colt Lightning Smooth O/S (55c)
|
|
|
Quantity in Basket:
None
Code: Colt_55c
Price: $68.00
Shipping Weight: 0.20 pounds
|
|
This is a set of grips made for a Uberti Colt Lightning
clone, but it may fit your bird's head style frame
regardless of the brand or model: check the dimensions,
send a tracing if you are not sure.
These grips are smooth, about 0.45 inches thick in the base
section, about 0.16 inches thick at the top, and may be
ordered either as a one-piece kit (3 parts: left panel,
right panel, and spacer, which you fit to your gun and
use epoxy glue to secure into a 1-piece style for guns
with a removable back-strap) or as a two-piece kit with
a screw mount (single screw with installed brass fittings
included, but send a tracing to indicate exactly where
you want the mounting hole).
BE SURE TO READ WHAT YOU ARE ORDERING! There are several
options above. If you leave them at the default setting,
you will get a 1-piece kit in ivory, and it will NOT fit
onto a gun without a removable back strap. If you
select the 2-piece screw mounting style, you will get two
panels with a screw mount, and if you do NOT send a
tracing, the screw will be located as indicated in the
specifications below. That may or may not be the right
location for your particular gun. To make sure, take
the grips off your gun, lay them on an index card or
similar stiff paper, and trace around them with a sharp
pencil. Mark the screw hole location. Mail this
tracing to me, so I can use it as a template.
Grip Size:
- Height of front edge (A) = 0.90 inch
- Overall height (B) = 3.05 inches
- Top length (C) = 1.28 inches
- Screw hole heigth(D) = 1.25 inches
- Front edge to screw hole (E) = 0.6 inches
- Width across screw hole = 1.38 inches
- Width across neck (narrow part at top) = 1.16 inches
- Width across widest part of base = 1.40 inches
Above is the ivory simulated grip. Below are the extra
aged and the aged ivory, and the spacer which is sent
with all kits if you order the 1-piece option. If you
order the 2-piece screw mount option, you get a screw
mount kit installed in the default location, unless you
send a tracing that indicates the location of the hole.
Please note that all the Tombstone Gun Grip Kits are
designed so that you may need to sand the edges to exact
fit with your gun. A template or tracing helps me make
sure I send a large enough grip so you can do that.
All grip kits are sent with a flat back. You may need to
make the pin locating hole, to exactly align it on your
particular gun after sanding the outline to exact fit.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_103b
|
Colt 1877 Lightning Orig. (103b)
|
$68.00
|
|
Colt_44c
|
Colt Lightning, Thin, Smooth (44c)
|
$68.00
|
|
Colt_102a
|
Lightning, Smooth w/logo 2-pc (102a)
|
$68.00
|
|
spacer3
|
Colt Lightning Spacer
|
$2.00
|
|
Beretta_112f
|
Beretta Stampede Lightning Smooth (112f)
|
$68.00
|
|
Colt_85a
|
Cimarron Lightning 1-pc (85a)
|
$68.00
|
|
Colt_76a
|
Colt Lightning Smooth, no logo (76a)
|
$68.00
|
|
HS_47b
|
High Standard Bird's Head (47b)
|
$68.00
|
|
HS_6c
|
HS Birdshead Stag (6c)
|
$75.00
|
|
Blank_112d
|
Generic Bird's Head (112d)
|
$38.00
|
|
HR_13a
|
H&R Birds head generic (13a)
|
$68.00
|
|
|