|
Ruger Bisley Smooth, o/s (100d)
|
|
|
Quantity in Basket:
None
Code: Ruger_100d
Price: $68.00
Shipping Weight: 0.25 pounds
|
|
This is a smooth Ruger Bisley grip with slightly thicker
panels, in another variation of the shape to fit yet other
Ruger frames. As always, the best way to get the correct
grip is to make a pencil tracing, on 3 x 5 index cards, of
your existing grips, mark the screw hole, and mail them to
me (not email or fax, which distorts the size). I will cut
out the tracing and use it as a gauge or template, and
make sure the grips are at least as large as the tracing,
to allow for proper fitting.
The second best way to order the right grip for a particular
gun is to carefully measure your gun frame, and compare the
measurements to the data given here. If your frame is no
larger in any direction then these grips could be sanded
lightly at the edges for a perfect fit. If your frame is
smaller in any direction, then of course these grips can't
be "sanded bigger" to fit!
I make several Ruger Bisley grips because every so often
someone sends me a template that shows their gun is NOT
the same as another of the same model or grip frame
identification. Production changes, tolerances, where the
frame was on the casting tree, who knows why, but the fact
is there are more than a few different shapes and sizes
for the exact same model or production series, even if
they all have the same frame code. Wish it were not so,
but since it is, the only option is to send a tracing or
measure carefully and take the responsibility yourself for
ordering the right one. I can't measure your gun for you,
nor can I make a tracing of your grips, but you can. It
is quicker and safer than sending me the grips, and cheaper
as well. Just use a 3 x 5 standard index card for each
grip tracing, write your contact info and/or order number
on the card, drop them in regular 1st class mail (no need
to use special padded envelopes or expensive delivery),
and I'll be glad to select the right grip to match.
- Front edge length = 0.35 inches
- Top circle notch, distance across corners = 0.52 inches
- Width of the top flat area = 0.69 inches
- Lower corner of the notch straight back to rear edge = 1.6 inches
- Middle of the front edge straight back to rear edge = 1.75 inches
- Narrow part of the neck, smallest dimension (angled across the grip) = 1.48 inches
- Height of the lower front edge straight down to base line = 2.51 inches
- Overall height = 3.85 inches
- Width across the base just above the radius corners = 2.0 inches
- Screw hole height above base = 2.28 inches
- Width across grip at the screw hole, parallel to base = 1.38 inches
This grip comes with the standard screw mounting kit made
by Tombstone Gun Grip Kits, in 4-40 thread, installed for
you unless you specify otherwise by checking the box
above that says you don't want me to install the screw kit.
In that case, I will send it to you complete but not
installed and with no holes made in the grip for it.
The smooth finish looks much nicer than checkered finish
with pearl effects (translucent colors). It also looks
fine with solid colors.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Ruger_100a
|
Ruger Bisley Smooth (100a)
|
$68.00
|
|
Ruger_100b
|
Ruger Bisley Smooth OS (100b)
|
$68.00
|
|
Ruger_30a
|
Ruger Bisley, Fancy (30a)
|
$68.00
|
|
|