|
Browning Buckmark Smooth (93c)
|
|
|
Quantity in Basket:
None
Code: Brn_93c
Price: $78.00
Shipping Weight: 0.25 pounds
|
|
This is a replica of an original factory Browning standard
Buckmark grip, with a slight wood grain pattern but
otherwise smooth and having the "Buckmark" logo in one
panel. The left grip has a thumb rest design.
The originals from which the mold was made were built of
wood, not plastic, so these faithful copies have a slight
wood grain. They look nice in ivory but even better in a
walnut brown color. The backside is flat but will need to
be lightly relieved with a rotary bit tool such as a
Dremel Moto-tool, to clear the operating controls and to
match projections on the frame which help keep the grip
locked in position.
The easy way to mark these points for relief is to "paint"
the ends of the projecting frame parts with a Magic Marker
pen, and then press the grip against the frame in the proper
alignment. This makes a dot on the back of the grip. Just
lightly relieve this with a rotary bur, and try again until
the grip fits flat without any interference. Be sure to
cycle the gun, checking the safety and trigger operation.
Often a tiny bit more depth will spell the difference between
the gun working normally, and a malfunction.
Browning Buckmarks do have some loose or lightly held
parts behind the grips, so when you remove them from your
gun, do it over a spread-out sheet or similar light colored
broad surface. That way, anything that falls out will be
easily noticed and found (unlike parts that fall on the
carpet or down a heating register!).
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Brn_73a
|
Browning Buckmark Checkered (73a)
|
$78.00
|
|
|