Ruger Standard, Mark I, Mark II and Mark III, etc.

Note: Be sure you select the right vintage of Mark I grips! The hole spacing and magazine clearance cut is different for the Pre-71 and Post-71 production, with some cross-over and transitions that don't quite fit either vintage. If there is the slightest doubt about whether the spacing given for the listed grip is the same as your gun, PLEASE make a pencil tracing around your grips and mark the screw holes on it, and mail that to me! (A faxed image or photo usually doesn't give me a true size). Check the box that says you are sending a tracing, so I can wait for it before making your grips. If you order without sending a tracing, that is fine but you need to be responsible for ordering the right kind for your gun and check the hole spacing listed against your gun. Both left and right grips use different spacing on ALL Ruger autos.

The hole spacing is a very good way to tell what model of Ruger 22 Auto you have. Here's a table that may help:

Model	R Grip Hole Spacing	L Grip Hole Spacing	R Top Hole Ctr from top	L Bottom Hole from Base
Pre '71 Mk I	2.75-in	2.95-in	0.6-in	0.4-in
Post '71 Mk I	2.95-in	2.56-in	0.8-in	0.8-in
Mark II/III	2.75-in	2.56-in	0.75-in	0.8-in

Neither the Mark I or Standard models had any notches at the top for the bolt release or safety, but the Mark II has two notches at the top of the left-hand grip to clear these operating controls. The early Pre-71 models also had the bottom left-hand grip mounting hole only .37-.40 inches from the base of the grip, and the notch for the magazine follower at the bottom inside of the grip was on the right-hand grip. Both the later Mark I and the Mark II and Mark III have a clearance groove or notch on the lower inside surface of the left-hand grip.

Sort By: Default Name Ascending Name Descending Code Ascending Code Descending Lowest Price Highest Price Newest Items

Ruger Mark II Factory (48a) Code: Ruger_48a Price: $68.00 Quantity in Basket: none

Ruger Mark I Pre-71 Stag (51a) Code: Ruger_51a Price: $75.00 Quantity in Basket: none

Ruger Mark I Post-71 factory (125c) Code: Ruger_125c Price: $68.00 Quantity in Basket: none

Ruger Mk II and III Target (123) Code: Ruger_123 Price: $79.00 Quantity in Basket: none

Ruger Mark II/III Thumb Rest (51b) Code: Ruger_51b Price: $68.00 Quantity in Basket: none

Ruger Mark I Post-71 Smooth (43c) Code: Ruger_43c Price: $68.00 Quantity in Basket: none

Ruger Mark II/III Smooth (4b) Code: Ruger_4b Price: $68.00 Quantity in Basket: none

Ruger Mark II/III Stag (148b) Code: Ruger_148b Price: $75.00 Quantity in Basket: none

Ruger Mk.2/3 Semi-Target (10c) Code: Ruger_10c Price: $68.00 Quantity in Basket: none

Ruger MkII Sculpted (144b) Code: Ruger_144b Price: $68.00 Quantity in Basket: none

Ruger Universal 22 Auto Stag (109e) Code: Ruger_109e Price: $75.00 Quantity in Basket: none

Ruger Universal 22 Auto Smooth Code: Ruger_136e Price: $68.00 Quantity in Basket: none

Ruger 22/45 Mark III checkered Code: Ruger_125e Price: $68.00 Quantity in Basket: none