Tombstone Gun Grip Kits: www.TombstoneGrips.com - - Email: Dave@TombstoneGrips.com - -

****** Flat rate shipping for all items on the same order! USA +$15, International +$48. Bank Card processing adds 4% ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Specials
Screws,  Mounting Hardware
Medallions
Blank Rectangles, Spacers, & Grips
Grip Caps
Butt Plates


4-Cove Grip Cap, 1.6 x 2 (129d)
 
4-Cove Grip Cap, 1.6 x 2  (129d) Quantity in Basket: None
Code: GCap_129d
Price: $6.00
Shipping Weight: 0.01 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

:
Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

:
Drill screw holes? (Send tracing for location):
Yes, drill holes (be sure to send accurate pattern for location)
No, do not drill the screw holes (be SURE you really want this option!)
Optional note:
 
Quantity:
 
This is a 1.6 inch by 2 inch 4-cove oval grip cap, a little larger and taller than most. It has an interesting profile, and is made so you can sand it down to make it smaller without damaging the pattern.

The grip cap can be attached with epoxy glue so it does not require a screw hole, or you can have it made with a central screw hole. Hint: put a little pin or dowel in the flat surface of the stock so it projects above the surface slightly, and make a matching shallow hole in the back of the grip cap. This will align the cap and keep it from ever turning around the screw. Even a brad with the head cut off works fine as an alignment pin.

The oval shape is 1.60 inches in the smaller axis and 2.0 inches across the longer axis. If you measure a line 1.4 inches long edge to edge parallel to the short axis, the middle of that line will be 1/2 inch from the end of the long axis nearest the line, and 1.5 inches from the other end of the long axis. That lets you see the way the oval curves if you draw it on paper.

Here's another way to say that: measure along the long axis 1/2 inch from either end. At that point, the width across the grip cap will be 1.4 inches. (Since the grip cap is 2 inches long, the line will be 1-1/2 inches from the opposite end of the long axis.)

4-cove profile

Dave Corbin
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Credit Card Processing Center adds 4% to order total.


Home Page Colors Pearl effects Example Guns