Tombstone Gun Grip Kits: www.TombstoneGrips.com - - Email: Dave@TombstoneGrips.com - -

****** Flat rate shipping for all items on the same order! USA +$15, International +$48. Bank Card processing adds 4% ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Specials
Screws,  Mounting Hardware
Medallions
Blank Rectangles, Spacers, & Grips
Spacers
Grip Blanks
Blocks
Grip Caps
Butt Plates


S&W 38 I-frame Smooth (141b)
 
S&W 38 I-frame Smooth (141b) Quantity in Basket: None
Code: SW_141b
Price: $58.00
Shipping Weight: 0.10 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

:
Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

:
Add a medallion ($14/pr):
Screw Kit Options:
Yes, install the screw kit
No, just send screw kit uninstalled
  Include base filler
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
 
Quantity:
 
The Regulation Police is an I-frame revolver. The first versions were chambered for the .32 S&W Long, but this set of grips is for the later versions which were chambered (often) in the .38 S&W round. There is some difference in grip size depending on the specific version and year, so be sure to measure your gun and compare specs (or send a tracing to be sure).

Sometimes the grips were wrap around target style, converting the round butt frame with an extended square butt grip.

Spacer for step back frames such as Regulation Police But other times, they were round butt with a small filler in the back and across the base. These are the grips that would work with or without the filler. You may have to sand the base shorter for frames that don't use the filler in the lower backstrap and across the bottom. If you need this separate little filler, shaped like an L, check off the box and I'll include it. This is a shorter grip with small spacer compared to the longer 100c version for the .32 Reg.Police.

You would sand this filler to fit your particular frame, fit the grips to the frame, and then epoxy the L-shaped filler to one of the grip panel backs. After the epoxy cures, you can then mount the grips on the gun and carefully sand the edges so that the filler will match both grip panels perfectly when mounted.

This is also a way to convert guns to use the rounded butt when it originally came with a big, wrap- around style square base grip. Makes a more trim, neat and easily carried gun.

The grip size is:
  • Width across the base = 1 inch
  • Width across the screw hole = 1.1 inch
  • Height of the screw hole = 1.2 inch
  • Height of front corner from base = 1.9 inches
  • Height of rear corner from base = 2.56 inches
  • Width across top corners = 0.95 inches
  • Diameter of logo circle = 0.65 inches
  • Width of front step = 0.1 inches front edge to logo
  • Width of rear step = 0.15 inches rear edge to logo
This grip is very similar to the 141a. You need to make a pencil tracing around the grips and send that to me, to make sure you are getting a size that will work on your particular gun. If you want to send original grips, that would help, but be sure to insure the shipment.

Please note that I also have a slightly larger "universal" I-frame and top break revolver grip, smooth, that I may be able to sand to fit more closely if your gun uses a slightly larger grip. I also have a square-butt extended "target" grip for the .32 Hand Ejector (Regulation Police Model, post 1920 vintage but with 1917 patent stamp on original wood grips -- cylinders were heat treated after 1920). Golden Pearl I-frame Revolver


Related Item(s)
Code Name Price Availability  
SW_22b S&W 32 Break Top (22b) $58.00  
SW_37a S&W J-Frame Smooth (37a) $58.00  
SW_33b S&W J-frame new models (33b) $58.00  
SW_116b S&W J-Frame Stag (116b) $65.00  
SW_22c S&W Top Break/hammer (22c) $58.00  
SW_22a S&W Break Top Extended (22a) $58.00  
SW_141a S&W I-Frame Smooth (141a) $58.00  
SW_145b S&W .38 Reg.Police (145b) $58.00  

Dave Corbin
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Credit Card Processing Center adds 4% to order total.


Home Page Colors Pearl effects Example Guns