Tombstone Gun Grip Kits: - - Email: - -

****** Flat rate shipping for all items on the same order! USA +$15, International +$48. Bank Card processing adds 3.5% ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Screws,  Mounting Hardware
Blank Rectangles, Spacers, & Grips
A.J. Ordnance
American Arms
Colt and Colt Replicas
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Herbert Schmidt
Smith & Wesson
Break Top
K Frame / L Frame
N Frame
I Frame
J Frame
Other S&W Grips
Other Revolvers
Sterling Arms
Other Manufacturers
Grip Caps
Butt Plates

S&W 469 smooth, smaller size
S&W 469 smooth, smaller size Quantity in Basket: None
Code: sw_46g
Price: $68.00
Shipping Weight: 0.15 pounds
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

Add a medallion ($14/pr):
Drill screw holes? (Send tracing for location):
Yes, drill holes (be sure to send accurate pattern for location)
No, do not drill the screw holes (be SURE you really want this option!)
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
Optional note:
This is a grip kit for various Smith & Wesson versions of the 469 and similar 9mm compact pistols. The grip panels do not have screw holes, but if you need them, you must send a tracing with the screw holes marked on it. Some versions or models have no holes, and are held by a press fit. Some have various locations of holes, and various sizes of screws. If you don't specify the size of the screw and screw holes, I will use a 1/4 inch recess for the screw head and a .150 diameter hole for the screw shank, standard for 1911 screws.

I also have a similar but larger grip for various 469 and similar pistols from S&W that covers the rear top area (47F). It also has blank smooth panels without holes, and you can specify where you want holes and what size they should be for your particular gun, if you wish. Or you can make them yourself.

spacers The kit comes with a pair of spacers which you would want to sand to fit snugly into the grip frame cut-out, and then epoxy glue to the back of each grip so it holds the grip from turning. Instructions are provided.

Here are the dimensions for the grips:
    Left panel
  • Width across top flat = 0.7 inches
  • Height of top above front notch = 0.2 inches
  • Width of grip front edge to rear from front top corner to rear edge = 1.7 inches
  • Width of grip from center of magazine release notch to rear edge = 1.5 inches
  • Width across grip from front edge to rear edge just above the mainspring pin cut out, at the bottom = 1.6 inches.
  • Width of the bottom flat = 1.2 inches
  • Height of grip from front bottom corner to top corner, not including the 0.2-inch high raised top portion = 3.25 inches.
  • Height of grip measured 90-deg. to base, from top most portion to base = 3.4 inches.
  • Height of grip from rear top corner to start of mainspring pin cut out corner = 3.15 inches.
    Grip Thickness
  • Top center thickness = 0.2 inches
  • Bottom center thickness = 0.2 inches
    Left panel
  • Top flat width = 1.1 inches
  • Width across grip below the rear top to front edge = 1.6 inches
  • Width of grip across the narrow portion where web of hand fits, to front edge = 1.5 inches
  • Width of grip at the bottom area swell, maximum width of grip = 1.68 inches
  • Width from rear top corner of mainspring housing pin notch to front edge = 1.5 inches.
  • Width of base flat = 1.1 inches
  • Height of front edge measured along the edge = 3.58 inches
  • Height of grip measured at 90-degrees to base = 3.4 inches
  • Height of grip measured at the center (half way across) fromr top to base, parallel to front edge = 2.6 inches.

Related Item(s)
Code Name Price Availability  
SW_44d S&W Model 469 (44d) $68.00  
sw_47e S&W 469 smooth, larger size $68.00  

Dave Corbin
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Credit Card Processing Center adds 3.5% to order total.

Home Page Colors Pearl effects Example Guns