|
|
|
Hy Hunter Western 6-Shooter (13c)
|
| |
|
Quantity in Basket:
None
Code: Schmidt_13c
Price: $68.00
Shipping Weight: 0.25 pounds
|
| |
This is a smooth grip set for the "Hy Hunter" Western Six-Shooter
which was made by the German gunmaker Herbert Schmidt and
imported under the Hy Hunter trade name to the USA. It is a
"notch top" grip, similar to the Frontier Scout or Heritage
Arms single action grips. Hy Hunter also imported guns made
by Sauer & Sohn, Germany, and roll stamped the Hy Hunter
name on them. His company distributed the American-made
"Great Western" brand for some time as well, but did not
private label those guns.
In some cases the "Bounty Hunter" grips, which are similar,
will work on certain guns, but be sure to compare the dimensions
provided with your gun, or better, make a pencil tracing
around your existing grips on 3 x 5 index cards and mail
them to me, with the screw hole marked. Then I can cut
them out, hold them to the back of the grips like a gauge,
and make sure what you sent will fit inside the edges of
this grip. That way you have a little extra to sand to
perfect fit.
- Height of front edge (A) = 1 inch
- Over-all height of grip (B) = 3-1/4 inch
- Width across the base (C) = 2-1/8 inch
- Center of front edge to rear edge (D) = 1-3/4 inch
- Top flat (E) = insignificant, or none.
- Depth of notch (G) = 1/16 inch
- Width of notch (F) = 5/16 inch
- Height of screw hole center = 1-1/2 inch
- Width across screw hole center = 1-1/2 inch
- Screw hole center to rear edge = 0.75 inch
You will need to sand the edges to fit your gun exactly,
and make the alignment pin hole so it perfectly matches
the location on your gun. This is easy to do with a
small burr in a rotary hand tool like the Dremel Moto-Tool.
(Or a drill press, but be careful with a hand drill as the
bit can pull right through the grip in a second.)
|
Related Item(s)
|
