Tombstone Gun Grip Kits: - - Email: - -

****** Flat rate shipping for all items on the same order! USA +$15, International +$48. Bank Card processing adds 3.5% ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Screws,  Mounting Hardware
Blank Rectangles, Spacers, & Grips
A.J. Ordnance
American Arms
Colt and Colt Replicas
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Herbert Schmidt
Smith & Wesson
Break Top
K Frame / L Frame
N Frame
I Frame
J Frame
Other S&W Grips
Other Revolvers
Sterling Arms
Other Manufacturers
Grip Caps
Butt Plates

S&W K-Frame Stag (33a)
S&W K-Frame Stag (33a) Quantity in Basket: None
Code: SW_33a
Price: $75.00
Shipping Weight: 0.20 pounds
Select color (Natural or Aged recommended):
Natural ivory
Aged ivory ($10)
Extra Aged ($10)
Add a medallion ($14/pr):
Screw Kit Options:
Yes, install the screw kit
No, just send screw kit uninstalled
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
The S&W K-frame revolvers cover a wide range of models, from the early hand ejectors through the Victory model military and police, and the famous model 10 and its subsequent variations, the K-22, and K-38 Masterpieces, and the modern stainless steel versions.

This round-top grip makes any of them look more "vintage" in the sense of using original style grips rather than the larger "Magna" or "Target" styles that lap over the top of the frame.

The same grip can be used, in a pinch, on the larger "N" frame revolvers except that the flare at the very top of the grips, where the two angled edges reach out toward the sides of the frame, are a tad short to reach the edge, so a little of the frame shows at the top. If you have an N frame gun (such as the 1917 or Triple Lock, etc) that has missing or damaged grips and need something quick and inexpensive that will look nice even if it isn't a perfect fit at the top, these would work, and most casual observers wouldn't notice.

The stag horn effect is hand painted into the mold on top of a fine layer of talc, in three different colors. Each color must dry completely on the talc, and then another is applied. When the resin is poured, it adsorbs some of the acrylic color. Then, the layer first put down on top of the talc is lightly sanded to expose lower colors and make the grip look very natural. The talc, of course, is wiped off leaving only the color behind.

The escutcheon screw, nut, and insert ARE included and installed.

    Dimensions for this grip:
  • Width at Butt = 1-7/8 inch
  • From top to screw hole = 1-3/4 inch
  • From top to inside top step = 3/8-inch
  • Height = 3-inch

The measurements are taken with the butt on the zero or bottom line, and the top is the highest point of the radius measured at a right angle to the butt line. All distances are measured on a line at right angle to the butt.

Some sanding and fitting will be necessary to mate these grips to your individual firearm's frame. There is a locating pin in the lower butt area which requires a precisely located hole to keep the grips secure, and you will need to mark and drill a shallow, small hole in each of the grips for this pin.

Dave Corbin
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Credit Card Processing Center adds 3.5% to order total.

Home Page Colors Pearl effects Example Guns