Ruger GP100f/SP101 Stag (26e)
	Quantity in Basket: None Code: Ruger_26e Price: $75.00 Shipping Weight: 0.10 pounds
	Select color (Natural or Aged recommended): Natural ivory Aged ivory ($10) Extra Aged ($10) Select medallions ($14): None Tiny Daisy (3/8-in) Small Texas Star (1/2-in) Open Star (1/2-in) Bronze Star (5/8-in) Silver Star (5/8-in) Gold Cross (1/2-in) Silver Heart (1/2-in) Route 66 (1/2-in) Buffalo Nickel (5/8-in) Brass Anchor (5/8-in) Gold/Blue Anchor (5/8-in) Bronze Anchor (5/8-in) Silver Dragon (5/8-in) Copper Dragon (5/8-in) Gold Royal Crest (5/8-in) Brass Coat of Arms (5/8-in) Salzburg (5/8-in) Crossed swords (5/8-in) Byzantine Crest (5/8-in) Skull and bones (5/8-in) Bronco Buster (5/8-in) Crossed Pistols (5/8-in) 1860 Brass Eagle (5/8-in) 1940 Brass Eagle (5/8-in) Lion Head (5/8-in) Moose, walking (5/8-in) Copper Celtic Knot (5/8-in) Silver Celtic Knot (5/8-in) US Army, Retired (5/8-in) US Coast Guard, Retired (5/8-in) Ram's Head (5/8-in) Screw Kit Options: Yes, install the screw kit No, just send screw kit uninstalled Optional note: Are you sending a tracing?: YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. ************************************** NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. ***************************************************** I already mailed a tracing BEFORE I placed this order.
	Quantity:
This is a staghorn (simulated) set of grip panel inserts for the smaller size grips used on some GP100 and SP101 revolvers. Make sure you check the size before ordering! To determine if your gun uses this size, check your existing grip panel measurements against these: RIGHT GRIP PANEL Height, center of top through screw hole to base: 2-1/8 inch. Width, across through screw hole: 1-1/16 inches. LEFT GRIP PANEL Height, center of top to center of base: 2 inches Width, across through screw hole: 1-1/16 inches. Location of screw hole from front (trigger side) edge: 19/32 inch. Height of screw hole at 90-degress from base: 1-7/8 inches. There is a 1/2-inch OD x 1/8-inch deep locating hole with a center positioned 1/2-inch from the base, and 3/8-inch from the back edge. This leaves about 3/32 of an inch from the rear edge of the locating hole to the rear edge of the grip panel. The original grip panels have a large mounting screw with a very large ferrule, which covers too much of the panel. These panels use a 0.2 inch diameter ferrule and nut, with a stainless steel screw. This is more than strong enough to hold the grips and panels on the gun, without covering up so much of the decorative panel surface.

Related Item(s)

Code	Name	Price	Availability
Ruger_79b	Ruger GP100f/SP101 Panels (79b)	$68.00
Ruger_71c	Ruger GP100f/SP101 Factory (71c)	$68.00