|
NAA Mini Revolver 22LR (63c)
|
|
|
Quantity in Basket:
None
Code: NAA_63c
Price: $68.00
Shipping Weight: 0.10 pounds
|
|
This grip set fits the 22 Short and the 22 LR Mini Revolvers
made by North American Arms. The factory grips are routed
around the outer edges to drop into the frame cut-out. To
make fitting much easier with less work, these grips are
sent flat backed with a separate thin spacer, which you sand
lightly to fit into the frame, then epoxy to the back of
the grip.
A fingernail sanding stick, obtainable at any cosmetics
counter, is one of the best ways to do the fitting. Use
the coarse side to shape the spacer and the medium grit
side to finish it. The grip kit comes with mounting
screw and ferrules installed, unless you indicate otherwise.
The picture shows the larger size 22 Magnum grips, but
the general shape and mounting of the spacer is the same
as on the 22 Short and 22 LR pistols
Dimensions:
- Width across screw hole: 21/32 inch
- Height top corner to lower corner: 1-11/32 inch
- Width across top corners: 1/2 inch
- Distance from top corner to screw hole center: 7/8 inch
Please check your grips or pistol frame and make sure
you are ordering the right size for your gun!
This is a very small grip, so most of the medallions are
not appropriate for it. However, there is a Tiny Daisy
medallion that fits OK. You can check the box above if
you want this added, at the optional price shown.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
NAA_63d
|
NAA Mini Revolver 22Mag (63d)
|
$68.00
|
|
|