|
NAA Early Mini-Revolver (48e)
|
|
|
Quantity in Basket:
None
Code: NAA_48e
Price: $68.00
Shipping Weight: 0.15 pounds
|
|
This is a grip kit for the early North American Arms mini-
revolver in 22 LR, which was also made by and for Freedom
Arms at one point early in the Freedom Arms history. So it
is possible that your discontinued Freedom Arms mini-
revolver might work with this grip...but send a tracing
because there are so many variations!
Note the wide, flat top on this grip, which is not as curved
and rounded as the current production models. This grip came
from an original pattern for a 20 year old gun!
The grip kit has four parts: two spacers that fit into the
cut-out of the grip frame, and two panels that have a
mounting screw. The spacers are to be sanded to fit
nicely inside the grip frame, and then epoxy glued to
the backs of the panels. A little careful sanding and
fitting, and you will have snug, accurately fitted grips
that are stronger than wood or factory thermosetting
plastics, withstand high temperatures, and resist cracking
and aging.
If you have a more modern NAA revolver, check out the
listings for the 22 LR and the 22 Magnum versions (two
different grips sizes). This grip is only for the very
early models, back in the days when Freedom Arms and NAA
were swapping ownership and lawsuits and having a world
of fun deciding how to organize. (Freedom Arms no longer
makes mini-revolvers, but they were little jewels when
they were available.)
There is NO room for a medallion on these tiny grips.
That is why the option is not offered. It isn't an
oversight. I can't install a medallion because it would
hang over the edges of the grip!
Grip dimensions:
(If the top rear "corner" is labeled "A", the top front
"corner" is labeled "C", and the little peak at the base
toward the front is labeled "B", you can measure straight
between these points as follows...)
- From A to B = 1.5 inches (top rear to base point)
- From A to C = 0.7 inches (across top corners)
- From B to C = 0.95 inches (top front to base point)
- Maximum height = 1.645 inches
- Width across screw hole (min) = 0.77 inches
- Distance from a line drawn from B to C 90-degrees to rear edge = 0.927 inches
- Thickness at screw hole = 0.22 inches (aprox., adjustable)
- Line from B to center of hole = 0.59 inches
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
NAA_63c
|
NAA Mini Revolver 22LR (63c)
|
$68.00
|
|
NAA_63d
|
NAA Mini Revolver 22Mag (63d)
|
$68.00
|
|
|