|
|
|
Llama Mini-Max Thin (146a)
|
| |
|
Quantity in Basket:
None
Code: Llama_146a
Price: $68.00
Shipping Weight: 0.20 pounds
|
| |
This is a smooth set of grips for the .45 or .40 Llama
Mini-Max. The dimensions are slightly larger than the
factory checkered specs, and can easily be sanded smaller
if desired.
Because there are some slight differences in screw hole location
on the various models it is important to measure your gun,
and then compare to the grip specifications. If your grip
hole spacing is different, either e-mail the hole center
measurement for your gun, or make a tracing and indicate
the hole locations. The position of the bottom hole can be
relocated, as it is drilled after the grip is formed.
The back of the left grip has been relieved at the top
for the controls. You may need to enlarge the relief slightly
depending on your gun, but the bulk of the work has been
done for you.
Specifications for left grip:
- Length of front edge: 3.6 inches
- Height through center line: 3.6 inches
- Height at rear top corner to base: 3.5 inches
- Width across top screw hole: 1.4 inches
- Height of top rear relief step: 0.9 inches
- Width across base above corners: 1.6 inches
- Approximate top thickness: 0.21 inches
- Approximate base thickness: 0.21 inches
- Width across the center area: 1.5 inches
- Hole spacing (centers): 2.95 inches
Note: These grips are thin, for small hands and for
minimum bulk in concealed carry. A thicker set of grips
is available (.41 base, .34 top).
|
Related Item(s)
|
Code
|
Name
|
Price
|
Availability
|
|
|
Llama_52b
|
Llama IX-A 45 (52b)
|
$68.00
|
|
|
Llama_133a
|
Llama Mini-Max 45 (133a)
|
$68.00
|
|
|
Llama_146b
|
Llama Mini-Max thick (146b)
|
$68.00
|
|
|
