|
H&R Generic Top Break (1c)
|
|
|
Quantity in Basket:
None
Code: HR_1c
Price: $68.00
Shipping Weight: 0.20 pounds
|
|
This smooth grip blank is available without holes, so
that you can fit it to a wide range of sizes, models and
even brands other than H&R. It is large enough so that
you can sand it down to match nearly any of the top break
H&R's, as well as some Iver Johnsons, Smith and Wessons,
Hopkins and Allens, etc. It is big enough so long as you carefully compare the specifications to
your grips or gun frame...or send me a tracing or template
cut out of card stock to fit the gun frame.
If you would like for me to install a mounting screw, then
I really do need a template or tracing that shows the
outline and the screw hole location. Otherwise there is a
chance the screw location would put the screw
where the hammer spring might be on your gun.
If you order the kit and indicate that the mounting screw
should not be installed, I will send it along with the
ferrule and press-fit nut so that you can install it.
If you order the kit with medallions installed, it is
important to send a tracing or template so I know how close
to the edges to mount them.
Worst case would be if you order the grip kit without
sending a tracing, but with screw mount and medallions
installed. I can't do it with any assurance that the
screw hole will be right for your gun, nor that the medallion
would be properly centered once the grip has been sanded
to match your gun's outline. I have to assume you have
studied your gun, measured and compared the specs, and
are willing to assume responsibility for the match-up.
Grip kit specs:
- Width across top ears (A) = 1.05 inches
- Height of rear ear (E)= 2.6 inches
- Height of front ear (D) = 1.9 inches
- Width of front top flat (H) = 0.15 inches
- Width of rear top flat (I) = 0.2 inches
- Height of round top above line joining ears = .35 inch
- Width across the base (C) = 1.1 inches
- Width across widest portion, front to back = 1.25 inch
- Thickness at top = 0.267 inch (aprox)
- Thickness near base = 0.35 inch (aprox)
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
HR_117b
|
H&R 32 T.B. small frame (117b)
|
$68.00
|
|
HR_127c
|
H&R 22 T.B. smooth (127c)
|
$68.00
|
|
HR_59d
|
H&R T.B. lg. frame smooth (59d)
|
$68.00
|
|
HR_140b
|
H&R T.B. lg.frame checkered (140b)
|
$68.00
|
|
IJ_149b
|
Iver Johnson 32 TB (149b)
|
$68.00
|
|
IJ_62a
|
Iver Johnson 38 TB (62a)
|
$68.00
|
|
IJ_121a
|
IJ 32 Hammerless Smooth (121a)
|
$68.00
|
|
IJ_121c
|
IJ Smooth 32 Top Break (121c)
|
$68.00
|
|
IJ_138h
|
IJ 32 Top Break (138h)
|
$68.00
|
|
IJ_138g
|
IJ 38 Top Break (138g)
|
$68.00
|
|
HA_126b
|
Hopkins & Allen DA (126b)
|
$68.00
|
|
HA_46b
|
Hopkins & Allen 32 XL (46b)
|
$68.00
|
|
SW_22b
|
S&W 32 Break Top (22b)
|
$68.00
|
|
SW_22c
|
S&W Top Break/hammer (22c)
|
$68.00
|
|
SW_22a
|
S&W Break Top Extended (22a)
|
$68.00
|
|
SW_141a
|
S&W I-Frame Smooth (141a)
|
$68.00
|
|
SW_141b
|
S&W 38 I-frame Smooth (141b)
|
$68.00
|
|
SW_145b
|
S&W .38 Reg.Police (145b)
|
$68.00
|
|
SW_35a
|
S&W No.1 Breaktop (35a)
|
$68.00
|
|
SW_141c
|
S&W Generic Grip Blank (141c)
|
$38.00
|
|
SW_22d
|
S&W 32 w/hammer, smooth (22d)
|
$68.00
|
|
SW_100c
|
S&W 32 Reg.Police Rnd Butt (100c)
|
$68.00
|
|
SW_56e
|
S&W No.1 DA TopBreak (56e)
|
$68.00
|
|
|