Tombstone Gun Grip Kits: - - Email: - -

****** Flat rate shipping for all items on the same order! USA +$15, International +$48. Bank Card processing adds 3.5% ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Screws,  Mounting Hardware
Blank Rectangles, Spacers, & Grips
A.J. Ordnance
American Arms
Colt and Colt Replicas
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Ruger 22 Auto
Ruger Single Actions
Ruger DA Revolvers
Herbert Schmidt
Smith & Wesson
Sterling Arms
Other Manufacturers
Grip Caps
Butt Plates

Colt SAA Cimmaron Frontier Stag (95c)
Colt SAA Cimmaron Frontier Stag (95c) Quantity in Basket: None
Code: Colt_95c
Price: $75.00
Shipping Weight: 0.25 pounds
Select color (Natural or Aged recommended):
Natural ivory
Aged ivory ($10)
Extra Aged ($10)
Add a medallion ($14/pr):
Select mounting style:
1-piece kit w/spacer
2 panels w/screw
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
This Pietta model is yet another Colt Peacemaker Single Action Army clone with still another slight change in size and shape from the "original" 1873 model P.

It also happens to be about the right size for SOME versions of the Ruger Blackhawk 44 Magnum revolver frames! Some trimming is needed, but if you send a tracing, I can do that before sending it. Without a tracing, you have to do it since each Ruger can have a slightly different grip frame shape/size and I have no clue what you might be holding in your hands without a tracing. I've also noticed that this grip fits some of the early Ruger Single Six frames with a little trimming.

It is SO important that you send a pencil tracing around your existing grips or a template made by pushing the corner of a 3 x 5 index card into the front top corner of the frame, and then tracing with a pencil around the rest of the frame, cutting this out and making sure it fits the gun just like you want the backside of the grip to fit. Then mail it to me, so I can see what shape and size your particular revolver frame may be.

Or, if you don't mind taking the risk of having to send it back and getting a replacement subject to the costs of shipping again, just compare dimensions and check the box saying you'll be responsible if it doesn't fit your particular gun. Either way, you will eventually wind up with the right grip, but could be cheaper for you if you send the tracing with the order, so I can check the size and shape against the grip you ordered and make sure it will work -- or let you know if it won't.

size diagram
  • Front edge height (A) = 1.05-in
  • Overall height at front edge (B) = 3.14-inch
  • Overall height at start of rear curve = 3.04-inch
  • Width across the base (C) = 2.125-inch
  • Width at G when F is 1.5-inch = 1.5-inch
  • Flat area at top (E) = 1.25-inch
  • Center of front edge to rear edge (D) = 1.90-inch
This is a 1-piece kit, meaning you get two grip panels and a spacer, as shown, as the default configuration. You then sand the grip panels to fit your frame, and epoxy glue the spacer to one of them so it bears securely against the inside of the backstrap while the grip top is firmly against the frame at the top corner. After the epoxy cures, you sand the spacer by moving it in a circular motion on a flat piece of sandpaper so that the spacer is exactly the thickness of your gun frame. Then cement the other grip panel to the spacer, and you have a one-piece grip.

Of course, your gun must have a removable back strap for this to work. Otherwise, if your gun has a solid grip frame, you'll need to select the two-piece screw mounted option, and send me a tracing or template that shows the area where the screw could be mounted and not hit the hammer spring with the hammer cocked or with it down. I can usually guess fairly well using an original Colt grip as a guide, but why take the chance of another delay while you ship it back and get it done again, with the template or tracing required, when it could be sent the first time? It's cheaper to mail in the tracing by itself than to send it with a returned grip and check for re-shipping a new one!

There are so many different variations of Colt SAA grips listed for one simple reason: hardly any two clones use the same shape and size! Even the same brand and model will have variations from one production date to the next.
colt grips, 1 piece kit Grip backs

Related Item(s)
Code Name Price Availability  
Colt_129b Colt SAA Stag 2pc (129b) $75.00  
Colt_119a Colt SAA Stag 1-piece (119a) $75.00  
Colt_28F Colt Frontier SAA Stag, Larger (28F) $75.00  
Colt_7c Colt/Uberti 1873 SAA Stag (7c) $75.00  

Dave Corbin
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Credit Card Processing Center adds 3.5% to order total.

Home Page Colors Pearl effects Example Guns