Home Page
Medallion Options



Tombstone Gun Grip Kits
PO Box 3955
Central Point, OR 97502 USA

www.TombstoneGrips.com
Email: Sales.TombstoneGrips@Outlook.com


Enter Secure Store
Go to Home Page
See sample guns using Tombstone Grips

Any grip with sufficient space can have a medallion mounted on both grip panels. This looks especially nice on a plain grip, or in place of a factory logo. Medallions usually are mounted permanently in the grip with epoxy. Smaller grips should be limited to either the 1/2-inch (12.5-13mm) or the 5/8-inch (15-16mm) diameter medallions. Larger grips can use up to 3/4-inch, but when possible, the smaller medallions should be selected if the grip doesn't have a large flat area.

With most revolver grips, the medallion is located at the top. With 1911 and similar flat panel grips, the medallion is either centered between screw holes or located slightly above center (which looks more balanced on the full-size grips). You can mount medallions where you like of course.

The smaller the medallion diameter, the closer the edges can be to flush with the surface all around on a curved grip surface.
Texas Star, 3/4 inch
Texas Star (20mm)
1909 Indian Head Penny
Indian Head Penny (20mm)
1937 Indian Head Nickel
Indian Head Nickel (20mm)
1944 Mercury Dime
Mercury Dime (15mm)
Gold Cross on Silver circle, 1/2 inch
Gold Cross (12.7mm)
USN Service Logo, 3/4-inch
US Navy (20mm)
US Army Service Logo, 3/4-inch
US Army (20mm)
US Marines service Logo, 3/4-inch
US Marines (20mm)
US Marine Corps, 3/4-inch
US Marine Corps (20mm)
Small Texas Star, 1/2 inch
Small Star (12.7mm)
US Coast Guard Logo, 3/4-inch
USCG (20mm)
US Department of the Army Service Logo, 3/4-inch
US Dept of Army (20mm)
US Air Force Service Logo, 3/4-inch
US Air Force (20mm)
Brass Anchor, 5/8-inch
Brass Anchor (15mm)
Pewter Pistols, 5/8-inch
Pewter Pistols (15mm)
Pewter Bronco Rider, 5/8-in.
Bronco Rider (15mm)
Masons Logo, 3/4-inch
Masons (20mm)
Domed Star, 1/2-inch
Domed Star (12.7mm)
2-1/2 dollar coin
US 2-1/2 dollar
Buffalo Nickel 5/8-in
Buffalo Nickel (15.857mm)
Right to Keep and Bear Arms
2nd Amendment 7/8-in
5/8-in Lion
Lion Head (15.857mm)
3/4-in Elk
Large Elk (19.05mm)
3/4-in Bear Claw
Bear Claw (19.05mm)
3/4-in Rose
Rose (19mm)
Coat of Arms 11/32-in.
Coat of Arms (15mm)
Large Daisy 25/32-in.
Large Daisy (20mm)
Small Daisy 11/32-in.
Small Daisy (15mm)
Cougar Paw 25/32-in.
Cougar Paw (20mm)
Pewter Skull, 5/8-in.
Pewter Skull (15.875mm)
Small Open Star 1/2-in.
Small Open Star (12.7mm)
Large Open Star 3/4-in.
Large Open Star (19.05mm)
1860 Eagle 11/32-in.
1860 Eagle (15mm)
Small Elk 5/8-in.
Small Elk (15.875mm)
Buffalo Nickel 1/2-in.
Buffalo Nickel (12.7mm)
Copper Dragon .60-in.
Copper Dragon (15mm)
Silver Dragon .60-in.
Silver Dragon (15mm)
Bronze Star .60-in.
Bronze Star (15mm)
Navajo .79-in.
Navajo (20mm)
Royal Crest .60-in.
Royal Crest (15mm)
Silver Owl Head 3/4-in.
Owl Head (19.05mm)
Dead King 5/8-in.
Dead King (15mm)
Ram's Head 3/4-in.
Ram's Head (20mm)
Salzburg 5/8-in.
Salzburg (15mm)
Celtic Knot 5/8-in.
Celtic Knot (15mm)
Silver Heart 1/2-in.
Silver Heart (12.7mm)
Route 66 1/2-in.
Route 66 (12.7mm)
US Army, retired 5/8-in.
US Army, retired (15mm)
Walking Moose, 5/8-in.
Moose (15mm)
Crossed Swords, 5/8-in.
Crossed Swords (15mm)