|
Blank, 2-3/4 x 3-1/2 x 1/2 inch (55e)
|
|
|
Quantity in Basket:
None
Code: Blank_55e
Price: $8.50
Shipping Weight: 1.00 pounds
|
|
This is a block of polyurethane epoxy resin heat treated
and cured at 450-degrees for toughness. It is an ideal
size for making most single and double action revolver
grips other than the largest Herter, Freedom Arms, and some
oversized 1860 Army revolver grips.
The dimensions are 2-3/4 inches by 3-1/2 inches by 1/2 inch
thick. The thickness is a slightly over one-half inch.
To make a complete set of two grip panels, you would need
two of these blanks.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Blank_136b
|
Blank, 5 x 1-3/4 x 7/16 in
|
$12.50
|
|
Blank_114
|
Blank, 5 x 3 x 2 inch
|
$39.00
|
|
Blank_115
|
Blank, 7 x 2 x 2 inch
|
$38.00
|
|
Blank_141d
|
Blank 2.5 x 1.25 x 3/8 (141d)
|
$4.00
|
|
Blank_150a
|
Single Action Blank (one side only)
|
$20.00
|
|
Blank_150b
|
Tapered Grip Blank (one panel)
|
$20.00
|
|
Blank_137e
|
Blank 4.06 x 1.57 x .246 (137e)
|
$5.00
|
|
Blank_154d
|
Blank, 1.5 x 3.25 x .5 in (154d)
|
$8.00
|
|
Blank_43e
|
Blank, 4.4 x 0.7 x 0.25, Pair (43e)
|
$5.00
|
|
Blank_157c
|
Blank, 4.9 x 2.9 x 0.4-in (157c)
|
$10.00
|
|
Blank_109f
|
Blank, 1.9 x 6.1 x .25-in (109f)
|
$6.50
|
|
Blank_155b
|
Blank, 3.5 x 5.3 x 0.64-in (155b)
|
$16.50
|
|
|