|
Firestar M45 smooth (74d)
|
|
|
Quantity in Basket:
None
Code: Star_74d
Price: $68.00
Shipping Weight: 0.20 pounds
|
|
This is a smooth blank set of panels for the Star FirestarM45 (45 cal) auto pistol. It can also be sanded down andused for other models. The screw hole is not molded intothe grip, so it can be drilled where you want it. If yousend a tracing, the hole can be made in the location youindicate.
The backs of the panels are flat, so you can make thenecessary relief cuts with a rotary bit. Two spacer blocksare sent with the kit, so that you can optionally usethem on the back to prevent the grip from turning aboutthe mounting screw. Screws are not provided, as theseare made for the gun and thread into the frame. Use theones which come with your gun.
The spacers are available separately also (142e) as a kitof two, 1-1/8 x 1 rectangles, 1/8 inch thick. They can besanded to fit in the cutout on the gun frame, then epoxyglued to the back of the grip, and sanded to desiredthickness to prevent rubbing on the magazine.
The blanks are made oversized so you can sand to perfectfit for your gun. Dimensions are:- Width across the base (above curved corner): 1.82 inch
- Width across top corners: 2.2 inches
- Height at front corners: 2.94 inches
- Height at rear corners: 2.67 inches
- Height up the center at 90-deg to base: 2.8 inches
- Approximate thickness in center: 0.26 inches
- Approximate thickness at top: 0.29 inches
A pencil tracing, on paper and sent by mail (not a fax oremail) is required in order to locate the hole where youwant it. Or you can drill the hole yourself if desired.Check the box above to indicate your desires.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Star_73d
|
Firestar M45 Factory (73d)
|
$68.00
|
|
Star_74c
|
Firestar M40, M43 checkered (74c)
|
$68.00
|
|
|