|
Sig Sauer 238 factory (46d)
|
|
|
Quantity in Basket:
None
Code: Sig_46d
Price: $68.00
Shipping Weight: 0.20 pounds
|
|
This is a factory pattern grip from the "Rainbow" version
of the Sig-Sauer P238 .380ACP locked action single action
only autoloader. It has a nice stippled pattern, rather
than checkering, as seems to be more in scale to the size.
Two spacers help secure the grips, although each panel has
two screws that hold it securely. Sand the spacers so they
are a nice fit into the frame cut-out on each side (you can
see how they are supposed to fit, with the little tail
section fitting into the frame notch). Then epoxy glue them
to the back of the grip panels with the grips in place,
following the instructions that come with the grip kit.
The spacers will prevent the panels from moving even if
the screws should work loose.
For better appearance with pearl and other translucent
effects, select the 46e smooth version. A smooth surface
finish always brings out the depth and pattern much beter
with pearl effects.
The grips are an average of 0.180-inches thick, just slightly
more than the factory grips, but you can sand the flat backs
to make them thinner. However, be careful not to make them
too thin, or the grip screws will go too far into the
frame and could bind against the magazine.
The grip dimensions are as follows:
LEFT GRIP PANEL
- Front edge = 2.52 inches
- Base edge = 1.3 inches
- Rear edge = 2.0 inches
- Top edge = 0.91 inches
- Front top step length = .13 inches
- Front top step depth from top = 0.4 inches
- Rear (safety) notch length = 0.49 inches
- Rear (safety) notch depth = 0.43 inches
- Hole spacing/location = same as right grip panel
- Average thickness = .180 inches
RIGHT GRIP PANEL
- Front edge = 3.0 inches
- Base edge = 1.3 inches
- Rear edge = 2.15 inches
- Top edge = 1.35 inches
- Hole spacing = 2.14 inches
- Base to bottom hole center = 0.46 inches
- Top to top hole center = 0.33 inches
- Average thickness = .180 inches
- Grip width across center = 1.44 inches
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Sig_46e
|
Sig Sauer 238 smooth (46e)
|
$68.00
|
|
|