|
Hy Hunter Staghorn Western 6-shooter
|
|
|
Quantity in Basket:
None
Code: Schmidt_13G
Price: $75.00
Shipping Weight: 0.20 pounds
|
|
This is a staghorn version of the Hy Hunter Western 6-Shooter
grip. Hy Hunter guns were primarily made by Herbert Schmidt
(Germany) and are grouped with the "Hawes" category because
Hawes, Hy Hunter, and a number of other brands of imported
firearms similar to the Hawes line were built by J.P. Sauer
& Sohn, or by Hertert Schmidt, and imported from Germany. (Besides
which, a label saying "Hawes" is a lot shorter than one which
says all the various names by all the German producers and
all the US trade names.)
The dimensions for this grip are listed below, and should
be carefully compared to your own gun. Never order just because
the name is the same as your gun. There are far too many
versions, variations, production changes, and so forth,
which result in slightly different shapes and sizes for
the grips, even for the same model.
- Front edge length (A) = 1.0 inch
- Overall height (B) = 3.14 inch
- Width of base (C) = 2.066 inch
- Center of front edge to rear edge (D) = 1.61 inch
- Top flat length (E) = 0.67 inch
- Length of notch (F) = 0.2865 inch
- Height of screw hole center = 1.47 inch
- Width across center of screw hole = 1.45 inch
- Front edge to screw hole center = 0.768 inch
- Thickness at the base area = 0.57 inch
- Thickness at top = 0.34 inch
Depending on your particular gun, you may want to gently
cut a relief at the top edge using a hand-held rotary tool
such as the "Moto-tool". If you do, be sure to clamp the
grip panel in a padded vise or screw it to a scrap board
which can be clamped to a solid work surface. Mark the
outline of the area you want to remove with a pencil, and
hold the tool securely so the bit doesn't grab and jump
around. If you use an abrasive bur rather than a mill-like
cutter, it greatly reduces this tendency.
This grip can also be ordered as a 1-piece kit (spacer
and two panels, instead of a mounting screw) if your
gun uses a removable back strap like the original Colt
1873 Peacemaker and you prefer the screwless mounting.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Schmidt_13c
|
Hy Hunter Western 6-Shooter (13c)
|
$68.00
|
|
GW_99c
|
Great Western II smooth (99c)
|
$68.00
|
|
Hawes_50d
|
Hawes/Great Western (50d)
|
$68.00
|
|
|