|
S&W 38 I-frame Smooth (141b)
|
|
|
Quantity in Basket:
None
Code: SW_141b
Price: $68.00
Shipping Weight: 0.10 pounds
|
|
The Regulation Police is an I-frame revolver. The first versions
were chambered for the .32 S&W Long, but this set of grips
is for the later versions which were chambered (often) in the
.38 S&W round. There is some difference in grip size depending
on the specific version and year, so be sure to measure your
gun and compare specs (or send a tracing to be sure).
Sometimes the
grips were wrap around target style, converting the round
butt frame with an extended square butt grip.
But other times, they were round butt with a small filler
in the back and across the base. These are the grips that
would work with or without the filler. You may have to
sand the base shorter for frames that don't use the filler
in the lower backstrap and across the bottom. If you need this
separate little filler, shaped like an L, check off the box
and I'll include it. This is a shorter grip with small spacer
compared to the longer 100c version for the .32 Reg.Police.
You would sand this filler to fit your particular frame,
fit the grips to the frame, and then epoxy the L-shaped
filler to one of the grip panel backs. After the epoxy
cures, you can then mount the grips on the gun and carefully
sand the edges so that the filler will match both grip
panels perfectly when mounted.
This is also a way to convert guns to use the
rounded butt when it originally came with a big, wrap-
around style square base grip. Makes a more trim, neat and
easily carried gun.
The grip size is:
- Width across the base = 1 inch
- Width across the screw hole = 1.1 inch
- Height of the screw hole = 1.2 inch
- Height of front corner from base = 1.9 inches
- Height of rear corner from base = 2.56 inches
- Width across top corners = 0.95 inches
- Diameter of logo circle = 0.65 inches
- Width of front step = 0.1 inches front edge to logo
- Width of rear step = 0.15 inches rear edge to logo
This grip is very similar to the 141a. You need to make a
pencil tracing around the grips and send that to me, to
make sure you are getting a size that will work on your
particular gun. If you want to send original grips, that
would help, but be sure to insure the shipment.
Please note that I also have a slightly larger "universal"
I-frame and top break revolver grip, smooth, that I may be
able to sand to fit more closely if your gun uses a slightly
larger grip. I also have a square-butt extended "target"
grip for the .32 Hand Ejector (Regulation Police Model,
post 1920 vintage but with 1917 patent stamp on original
wood grips -- cylinders were heat treated after 1920).
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
SW_22b
|
S&W 32 Break Top (22b)
|
$68.00
|
|
SW_37a
|
S&W J-Frame Smooth (37a)
|
$68.00
|
|
SW_33b
|
S&W J-frame new models (33b)
|
$68.00
|
|
SW_116b
|
S&W J-Frame Stag (116b)
|
$75.00
|
|
SW_22c
|
S&W Top Break/hammer (22c)
|
$68.00
|
|
SW_22a
|
S&W Break Top Extended (22a)
|
$68.00
|
|
SW_141a
|
S&W I-Frame Smooth (141a)
|
$68.00
|
|
SW_145b
|
S&W .38 Reg.Police (145b)
|
$68.00
|
|
|