|
Ruger Mark II/III Stag (148b)
|
|
|
Quantity in Basket:
None
Code: Ruger_148b
Price: $75.00
Shipping Weight: 0.20 pounds
|
|
This grip fits the Ruger Mark II in all its variations,
and the Mark III if you don't mind making a small relief
for the side-mounted magazine release (it isn't hard to
do, but would look odd on a Mark II grip).
The hole spacing is a very good way to tell what model
of Ruger 22 Auto you have. Here's a table that may help:
Model |
R Grip Hole Spacing |
L Grip Hole Spacing |
R Top Hole Ctr from top |
L Bottom Hole from Base |
Pre '71 Mk I |
2.75-in |
2.95-in |
0.6-in |
0.4-in |
Post '71 Mk I |
2.95-in |
2.56-in |
0.8-in |
0.8-in |
Mark II/III |
2.75-in |
2.56-in |
0.75-in |
0.8-in |
Neither the Mark I or Standard models had any notches at
the top for the bolt release or safety, but the Mark II has two
notches at the top of the left-hand grip to clear these
operating controls. The early Pre-71 models also had the
bottom left-hand grip mounting hole only .37-.40 inches
from the base of the grip, and the notch for the magazine
follower at the bottom inside of the grip was on the
right-hand grip. Both the later Mark I and the Mark II and
Mark III have a clearance groove or notch on the lower
inside surface of the left-hand grip.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Ruger_123
|
Ruger Mk II and III Target (123)
|
$79.00
|
|
Ruger_51b
|
Ruger Mark II/III Thumb Rest (51b)
|
$68.00
|
|
Ruger_43c
|
Ruger Mark I Post-71 Smooth (43c)
|
$68.00
|
|
Ruger_51a
|
Ruger Mark I Pre-71 Stag (51a)
|
$75.00
|
|
Ruger_125c
|
Ruger Mark I Post-71 factory (125c)
|
$68.00
|
|
Ruger_4b
|
Ruger Mark II/III Smooth (4b)
|
$68.00
|
|
Ruger_48a
|
Ruger Mark II Factory (48a)
|
$68.00
|
|
|