Tombstone Gun Grip Kits: - - Email: - - Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503

****** Flat rate shipping, all items on one order: Within USA, $11. Out of country, $45. ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

A.J. Ordnance
American Arms
Colt and Colt Replicas
Freedom Arms
Great Western
Harrington & Richardson
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Merwin & Hulbert
Herbert Schmidt
Smith & Wesson
Sterling Arms
Other Manufacturers
Grip Caps
Butt Plates
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware

H&R 929/NEF 22 UltraMag smooth
H&R 929/NEF 22 UltraMag smooth Quantity in Basket: None
Code: HR_148c
Price: $58.00
Shipping Weight: 0.20 pounds
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

Select Mounting Type:
Two separate 6-32 screws
Single 2-56 screw mount
No holes (I'll do it myself)
Single No.4 mounting kit (see text)
Select medallions ($14):
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
This grip is a larger version of the H&R 929 checkered factory grip (23a and others) which fits the New England Firearms 22 Ultra Mag swing-out cylinder revolver. As you may know, Harrington & Richardson handguns were reborn as NEF (New England Firearms) for a brief period, but some of the models were apparently modified because the earlier grips for the 929 and similar guns are a little small for the NEF production guns that look nearly the same.

As always, compare dimensions before you order, and send a pencil tracing on 3 x 5 index cards of your grips, showing the screw hole location, with a note as to the kind of mounting.

Mounting Notes:
Some models use two 6-32 oval head screws that thread into the frame, but if the screw hole location is carefully marked, it is also possible to use a single 2-56 screw kit. The No.2 screw will pass cleanly through the hole in the frame used for the 6-32 mounting screws and clamp the two grip panels on the frame, the same as most double action revolvers. However, some frames have an open space where a single No.4 mounting screw will easily pass through. If you mark your tracing with this area and check to make sure the hammer spring won't interfere with the screw, you can select the No.4 mounting kit. Be aware that if you select the wrong kind of mounting for your particular version of the gun, it may or may not be possible to install the right kind in the same grips (for instance, the 6-32 screws require holes too large to retro-fit the grips with the single screw kits). You can also opt to put the screw holes in when you get the grips (ship with no holes option). This is a good option if you don't wish to send a tracing, since you can locate the holes by holding the grips up to the gun and marking through the holes on the grip back.

Here are the dimensions for this grip:
  • Overall height = 3.2 inches
  • Width across round top = 1.3 inches
  • Base to front edge of rounded top = 2.5 inches
  • Thickness at top = 0.4 inches
  • Width across narrow part of "neck" = 1.05 inches
  • Width across screw hole = 1.38 inches
  • Screw hole center to rear edge = 0.65 inches
  • Height of screw hole center from base = 1.2 inches
  • Width across base = 1.85 inches
  • Thickness at base = 0.37 inches

Please check the dimensions of your gun carefully, and see whether this grip, or one of the smaller verions, is the proper size for it.

Medallion Installation:
This particular grip design has a very large rounded bulge or "bulb top" design. It is very difficult to install a medallion in this area and make it look good, because it must be be set so deeply to get the edges at the surface so they don't stick up. It looks better to put a medallion on the lower portion of the grip. The medallions won't be visible when you are shooting the gun, of course, but they will be quite visible in a holster that exposes the grips. If you select a medallion, it will be installed in the lower portion of the grip unless you expressly ask for it to be installed elsewhere (and there is no return in that case since the grip isn't normally resellable with a medallion mounted in the top portion due to the curvature of the area).

Related Item(s)
Code Name Price Availability  
HR_132a H&R 929 Sidekick 132a $58.00  
HR_141f H&R 929, 622, 732 Stag (141F) $65.00  
HR_23a H&R Mod.732 (23a) $58.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 90 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.

Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!

Home Page Colors Pearl effects Example Guns