Tombstone Gun Grip Kits: www.TombstoneGrips.com - - Email: Dave@TombstoneGrips.com - - Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503

****** Flat rate shipping, all items on one order: Within USA, $11. Out of country, $45. ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Specials
A.J. Ordnance
American Arms
AMT
Ballester-Molina
Beretta
Bersa
Bond
Browning
Colt and Colt Replicas
Davis/Cobra
EAA
EMF
FEG
FIE
Freedom Arms
Great Western
Harrington & Richardson
Hawes
Heritage
Herter
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Jennings
Llama
Merwin & Hulbert
Nagant
Raven
Remington
Ruger
Herbert Schmidt
Savage
Sig_Sauer
Smith & Wesson
Star
Sterling Arms
Taurus
Other Manufacturers
Grip Caps
Butt Plates
Medallions
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware


H&R Birds head generic (13a)
 
H&R Birds head generic (13a) Quantity in Basket: None
Code: HR_13a
Price: $58.00
Shipping Weight: 0.20 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

:
Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

:
Select medallions ($14):
Screw Kit Options:
Yes, install the screw kit
No, just send screw kit uninstalled
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
 
Quantity:
 
Grip with mounting screw kit installed Although this is a universal or generic grip kit, it was built primarily to fit a Harrington & Richardson Premier top break caliber .38 S&W revolver, with a round butt. If you would like a vintage look that retains the authentic esthetics of the gun, while providing a larger, longer, more comfortable hold, fit this grip kit to your gun.
    Grip Dimensions:
  • Width across top corners = 1.1 inches
  • Front top "step" = .16 inches
  • Rear top "step" = .243 inches
  • Height of top above a line drawn across the corners = 0.33 inches
  • Width of most narrow section at top = 1.04 inches
  • Width across inside edge of the spacer = 1.39 inch
  • Height of spacer at grip center = 0.51 inch
  • Height of rear spacer extension from inside to tip = 1.06 inch
  • Distance from top rear corner to tip of "bird beak" at base = 2.93 inches


H&R Premier Hammerless H&R top breaks had a number of different grip styles other than the most common two-panel style fitted to the full outline of the frame. This particular style uses a filler to extend the size of the grip at the rear strap, and at the base. The filler block will need to be sanded or cut to clear the frame of the gun, and sanded to fit the outline of the extended grips. A small upward curve should be blended to the shape of the front strap, and the back curve of the block blended to match the rear of the frame.

Important
If you want the screw kit installed, send a tracing that indicates where it should go to fit your gun. Otherwise, I can only put the hole where it fits on an H&R 38 Top Break Premier model (since that's the gun I used to make the grips in the first place). A tracing allows me to make sure the grips are large enough. I don't fit them to your gun using the tracing, since you need to have the gun in hand to fit the spacer properly. I'd just be guessing, whereas you can do it exactly.

This grip may be used on other, similar size revolvers. Some suggestions are the S&W I-frame and J-frames, early top breaks, Hopkins and Allen, and Iver Johnsons. Just compare dimensions and make sure that your gun will accept this size or slightly smaller, in the same two-panel mounting style.

The grips are formed without a mounting hole, which is drilled if you indicate that the screw mounting kit should be installed. Otherwise, they can be left smooth, and you can install the screw kit if you wish. Just check the appropriate box above to indicate your choice. Either way, I'll include the mounting kit with the grips.

This is sent as a universal or generic kit rather than to fit a specific gun. You will want to sand and fit the spacer to the required shape. After using 5-minute epoxy glue to hold the spacer block to one grip panel, you can then sand the block thickness so it matches the gun frame thickness. Then mount the grip panels on the gun, and sand the bottom edge of the grips and spacer so they blend smoothly together.

To make the base even more secure, drill two small (1/8 to 3/16 inch diameter) shallow blind holes in the spacer, push two roll pins into them, and then drill matching holes in the other panel. When you install the grips, the pins will keep the spacer and panel from shifting even slightly under a firm hold. If you make the set of holes in the spacer block slightly snug for a tight fit on the pins, and the other set in the grip panel a close slip fit, the pins will stay in the spacer block when you remove the grips.
Fit the spacer block to the base of your gun, then mount it to one grip panel Spacer block is epoxy glued to one panel, then sanded to match the shape Grip panel with spacer attached and fitted H&R Premier Hammerless H&R Premier Hammerless


Related Item(s)
Code Name Price Availability  
SW_141c S&W Generic Grip Blank (141c) $38.00  
Blank_112d Generic Bird's Head (112d) $38.00  
HR_1c H&R Generic Top Break (1c) $58.00  
SW_67d S&W J-Frame Generic Smooth (67d) $58.00  
SW_22b S&W 32 Break Top (22b) $58.00  
IJ_121c IJ Smooth 32 Top Break (121c) $58.00  
SW_22c S&W Top Break/hammer (22c) $58.00  
SW_22a S&W Break Top Extended (22a) $58.00  
SW_35a S&W No.1 Breaktop (35a) $58.00  
IJ_138h IJ 32 Top Break (138h) $58.00  
IJ_138g IJ 38 Top Break (138g) $58.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 90 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.


Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!


Home Page Colors Pearl effects Example Guns