This grip was made to fit a Charles Daly Bobtail .45 standard
frame length 1911 pistol. It will also fit most other
bobtail style single-stack 1911's, provided the hole
spacing is 3-1/16 inch between centers. All you have to
do in order to tell whether the grip fits your gun is to
compare the screw hole center spacing. If your gun uses
3-1/16 spacing (standard for the full size 1911), then
you can mount this grip on the gun. Otherwise, not.
The "bobtail" refers to the rear lower corner being cut
off at an angle (to make the gun easier for concealed
carry). The dimensions of the grip are:
Overall height = 4.013 inch
Width across grip at top hole location = 1.25 inch
Width across grip at bottom hole location = 1.54 inch
Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 45-60 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances. If you can't wait, please don't order! I'm working as fast as possible.
Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.
Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order
just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!