|
Colt/Uberti SAA 1-pc (64e)
|
|
|
Quantity in Basket:
None
Code: Colt_64e
Price: $68.00
Shipping Weight: 0.25 pounds
|
|
This is a 3-part kit to make a 1-piece grip, to fit certain
versions of the Uberti "Colt SAA Clone" revolvers. It may
also fit other brands of Single Action Army style guns.
The kit consists of two grip panels and a curved spacer.
First you sand the grip panels to perfect fit with your
frame, and then you align one panel and epoxy glue the
spacer to the back. After the epoxy cures, you align and
glue the other panel to the spacer.
This style of grip requires a gun with removable back
strap. Rugers and solid grip frame Colt copies will NOT
work with this style. However, you CAN select this
grip to be sent with a screw kit installed, as a 2-piece
grip set. In that case, the spacer would be replaced by
a screw mount kit. The grips could then be installed on
either kind of grip frame.
Be SURE to compare all the measurements with your own gun
and do NOT simply rely on the name. Guns even of the same
make and model will vary with production runs, so the same
make and model might use slightly different size or shape grips.
To have a guarantee that the grips will be large enough for
proper fitting, send a pencil tracing (see TRACING for details.)
Specifications:
- Front edge length (A) = 1 inch
- Overall height (B) = 3.1 inches
- Base width (C) = 2.2 inches
- Center of front edge to rear edge (D) = 1.9 inches
- Width of top flat (E) = 1.18 inches
- Thickness near top edge = 0.3 inches
- Thickness near base, center area = 0.5 inches
If you select the 2-piece kit with screw mount, be SURE
to send a tracing with the screw hole indicated. Otherwise
if I must guess and use the average Colt S.A.A. screw
location, it may or may not match your gun... the various
hammer spring and frame bracing locations in different
clones will not always allow a screw to pass through in
the same location as a similar gun. A tracing solves so
many problems that I've often been tempted to require one
in order to accept the order, because I don't like to send
grips that won't fit, and I have no other good way to tell
about your particular gun's tolerances. But you have the
option to take the risk for yourself, if you wish to avoid
sending a tracing. If you do send one, I can guarantee
the grip will be large enough to be sanded properly for
fit. If you don't, I can only send what you order.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_81c
|
Colt Generic 3-pc SA Smaller (81c)
|
$68.00
|
|
Colt_56a
|
Colt SAA Factory w/Eagle (56a)
|
$68.00
|
|
Colt_94b
|
Colt SAA (1873) Steer Head (94b)
|
$68.00
|
|
Colt_116a
|
Colt 1873 Checkered (116a)
|
$68.00
|
|
Colt_129b
|
Colt SAA Stag 2pc (129b)
|
$75.00
|
|
Colt_129a
|
Uberti Regulator 3pc (129a)
|
$68.00
|
|
Colt_28d
|
Colt Frontier SAA Stag (28d)
|
$75.00
|
|
Colt_57a
|
Colt Generic 3-pc SA Larger (57a)
|
$68.00
|
|
Colt_91a
|
Colt SAA 1873 Smooth (91a)
|
$68.00
|
|
Colt_78a
|
Colt Generic 3-pc SA Thick (78a)
|
$68.00
|
|
spacer1
|
Colt Single Action Spacer
|
$2.00
|
|
Colt_27a
|
Colt Frontier Scout/Logo (27a)
|
$68.00
|
|
Colt_45b
|
FIE Texican 2pc smooth (45b)
|
$68.00
|
|
Colt_143a
|
Colt 1873 Smooth, Thin 3-pc (143a)
|
$68.00
|
|
Colt_119a
|
Colt SAA Stag 1-piece (119a)
|
$75.00
|
|
Colt_151a
|
Generic Colt SA Blanks (151a)
|
$38.00
|
|
Colt_56d
|
Colt SAA wide throat (56d)
|
$68.00
|
|
Colt_28F
|
Colt Frontier SAA Stag, Larger (28F)
|
$75.00
|
|
Colt_3F
|
Uberti Cattleman 1-pc (3F)
|
$68.00
|
|
Colt_112c
|
Colt Cowboy SAA (112c)
|
$68.00
|
|
Colt_112e
|
Colt Cowboy Smooth (112e)
|
$68.00
|
|
Colt_1D
|
Uberti Cattleman Stag (1D)
|
$75.00
|
|
|