|
Colt Mustang Factory Checkered (48c)
|
|
|
Quantity in Basket:
None
Code: Colt_48c
Price: $68.00
Shipping Weight: 0.15 pounds
|
|
This is a checkered grip with the molded-in Colt logo,
for the Colt Mustang Pocketlite .380 pocket auto, patterned
after a current production grip.
The grips have the same kind of screw holes as a 1911 Colt
except they are not relieved from the rear for a 1/4-inch
mounting post. They mount flat on the frame with two
0.150-diameter screws with the standard .280 head diameter.
The grips look best with medallions that are 5/8-inch or 1/2-
inch, mounted where the Colt logo is molded. The larger
medallions take up too much space and tend to project too
much on the edges or must be sunk too deeply to look good.
If you want pearl or other swirled, translucent effects,
like amber or opal, please select the smooth version
instead of this checkered set! Checkered grips obscure
the patterns in pearl-like materials and really don't look
as good as a smooth grip.
If there is any doubt about whether your gun might work
with this set of grips, please make a pencil tracing around
your existing grips, on a 3 x 5 index card, mark the screw
holes clearly, and mail it to me. I can use it as a gauge
to make sure the spacing of holes and the shape and size
of this grip will work with your gun (or at least with the
outline you send me, which I have to assume is reasonably
accurate).
Grip Specs:
Left Grip
- Base width = 1.297 inches
- Front edge = 2.95 inches
- Rear edge = 2.86 inches
- Screw hole center spacing = 2.1785 inches
- Front edge to top screw hole center = 0.574 inches
- Front edge to bottom screw hole center = 0.574 inches
- Thickness at base area = 0.24 inches
- Thickness at top area = 0.18 inches
Right Grip
- Base width = 1.297 inches
- Front edge, straight portion = 2.6 inches
- Rear edge base to notch = 2.385 inches
- Screw hole center spacing = 2.1785 inches
- Front edge to top screw hole center = 0.574 inches
- Front edge to bottom screw hole center = 0.574 inches
- Thickness at base area = 0.24 inches
- Thickness at top area = 0.18 inches
The screw holes are the same as a Colt 1911 .45 except
the back is flat (no .250-inch stud hole). Screws go
directly into frame. Screw head fits a 0.277 diameter
hole and shank fits a 0.150/0.152 hole. Hole depth is
about 0.091 inches for the head.
Please note that the thickness and other dimensions can
be changed by sanding to suit.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_48d
|
Colt Mustang Smooth (48d)
|
$68.00
|
|
|