|
Colt Walker (20f)
|
|
|
Quantity in Basket:
None
Code: Colt_20f
Price: $68.00
Shipping Weight: 0.20 pounds
|
|
This is another version of a Walker Colt grip (1-piece kit)
that is a bit larger, to fit certain Uberti interpretations
of the gun. It may work with other brands, as well.
If the other listed Walker isn't quite large enough when
you compare dimensions, try this one instead.
Dimensions:
- Overall height (base to top) = 3.5 inches
- Height of front top "peak" from base = 3.3 inches
- Width across neck = 1.1 to 1.2 inches
- Width at 1.5 inches from base = 1.40 inches
- Width across the base = 1.5 inches
Note: The grip has only one true, flat edge (the
base) so it is not easy to measure. It is best if you remove
the back strap from your gun, remove the grips, put the
back strap back on, and press a 3 x 5 index card firmly
against the frame to create an outline that looks just
like the backside of one grip, then trace around the
frame as far as you can to help define this outline.
Cut the ouline to make a template, which is the same
size as the frame and represents the flat smooth back of
one grip panel. If you mail that to me, I can use it as
a gauge to determine the proper shape and size for your
gun's grips (and allow a little extra for easy fitting).
The kit consists of two panels and a spacer. Sand the two
panels to match the gun frame and then epoxy glue the spacer
to one panel, adjusting the position so it fits well with
the grip positioned on the gun. A little masking take can
help keep the grip in place while the epoxy cures. Then
epoxy the other panel in place, and you have a 1-piece
grip. If any epoxy gets on the gun frame, you can remove
it with acetone.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_4a
|
Colt Walker (4a)
|
$68.00
|
|
spacer4
|
Colt Walker Spacer
|
$2.00
|
|
Colt_65d
|
Colt Walker/Uberti O/S (65d)
|
$68.00
|
|
|