|
Colt 1873 SAA Smooth (119d)
|
|
|
Quantity in Basket:
None
Code: Colt_119d
Price: $68.00
Shipping Weight: 0.25 pounds
|
|
This is yet another slightly different shape and size of
grip for the infinite variety of Cold 1873 Single Action
Army revolver clones made around the world. It is always
a good idea to either carefully compare measurements with
your grip frame, or make a template or pencil tracing
around your existing grips and send it by mail (not fax
or email, which distorts the size).
This smooth grip has no molded-in screw holes, so you can
use it either as a 1-piece grip (with the spacer kit) or
you can have the screws installed if you indicate on your
drawing or tracing exactly where they should go.
If you don't send a tracing, or send one without the
screw hole location shown, and also check the option to
install the grip screw kit, all I can do is put the
screw holes where they are found on a typical 1873 clone.
This may or may not be where it should be on your gun, but
it is probably close. So long as the screw misses the
hammer spring and any strange projections from the frame
that some manufacturers decide their copy must have
even though it wasn't on the original gun, the location
of the screw doesn't make any difference. It will look
fine if it is a few millimeters from where your present
grips happen to have the hole. But it eliminates any
chance of the screw running into something it should not
if you do send the tracing with screw hole indicated.
Here are the dimensions, so you can measure your own grips
and see if they are the same or slightly smaller:
- Overall grip height (B) = 3.3-in.
- Front edge height (A) = 0.9-in.
- Base width (C) = 2.32-in.
- Center of front edge to rear edge (D) = 1.7-in.
- Top edge length (E) = 1.1-in.
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_94b
|
Colt SAA (1873) Steer Head (94b)
|
$68.00
|
|
Colt_116a
|
Colt 1873 Checkered (116a)
|
$68.00
|
|
Colt_91a
|
Colt SAA 1873 Smooth (91a)
|
$68.00
|
|
Colt_143a
|
Colt 1873 Smooth, Thin 3-pc (143a)
|
$68.00
|
|
Colt_37b
|
Colt 1873 Wide Base (37b)
|
$68.00
|
|
Colt_143d
|
Colt 1873 Pietta Smooth (143d)
|
$68.00
|
|
Colt_56a
|
Colt SAA Factory w/Eagle (56a)
|
$68.00
|
|
Colt_129b
|
Colt SAA Stag 2pc (129b)
|
$75.00
|
|
Colt_28d
|
Colt Frontier SAA Stag (28d)
|
$75.00
|
|
Colt_119a
|
Colt SAA Stag 1-piece (119a)
|
$75.00
|
|
Colt_28F
|
Colt Frontier SAA Stag, Larger (28F)
|
$75.00
|
|
Colt_112c
|
Colt Cowboy SAA (112c)
|
$68.00
|
|
Colt_64e
|
Colt/Uberti SAA 1-pc (64e)
|
$68.00
|
|
Colt_56d
|
Colt SAA wide throat (56d)
|
$68.00
|
|
|