Tombstone Gun Grip Kits: www.TombstoneGrips.com Email: Dave@TombstoneGrips.com Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503
Store Front Account Search Product List Basket Contents Checkout
Optional Sign In

Specials
AMT
Ballester-Molina
Beretta
Bersa
Bond
Browning
Colt and Colt Replicas
1911 Grips
Colt Single Action
Colt Double Action
Colt, other types
Davis/Cobra
EAA
EMF
FIE
Freedom Arms
Great Western
Harrington & Richardson
Hawes
Heritage
Herter
High Standard
Hopkins & Allen
Iver Johnson
Jennings
Llama
Merwin & Hulbert
Nagant
Remington
Ruger
Savage
Sig_Sauer
Smith & Wesson
Star
Sterling Arms
Taurus
Other Manufacturers
Grip Caps
Butt Plates
Medallions
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware


Colt 1873 Checkered (116a)
 
Colt 1873 Checkered (116a) Quantity in Basket: None
Code: Colt_116a
Price: $58.00
Shipping Weight: 0.20 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (if none selected, you get ivory)

:
Select Pearl Effect ($16 option). Do NOT select both SOLID and PEARL. (If you do, the pearl will over-ride the solid color choice):
Add a medallion ($14/pr):
Select mounting style:
Two panels with screw mount
No screw, send kit for 1-piece grip
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. If grip is smaller than tracing, it may be returned for exchange.
No. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable.
 
Quantity:
 
This grip fits the 32-20 Uberti/Navy Arms version of a Colt Single Action Army 1973 model. It is about 1/8 inch too short for some other Uberti clones, so measure and compare before ordering.

Please note that there is another set of grips just like this one which is 1/8 inch longer in the butt section. That set often fits the other Uberti clones (45, 38, etc.) but again, there is a lot of variation so please measure your gun and compare to the specifications.

However it is reported to be an excellent fit for the Taurus Gaucho. Note that this same grip can be ordered as a 3-piece kit, to make a 1-piece grip, or as two panels secured with a mounting screw (provided).

If your gun has a removable backstrap and trigger guard, you have the option of either a screw or a 1-piece grip. If your grip frame does not come apart that way, you can't use a 1 piece grip. (The 1 piece grip is sent as two panels plus a spacer. You sand the panels to fit, then sand the spacer for perfect thickness on your gun, and use epoxy or contact cement to secure the spacer to one panel, then to the other after the first one is set.)

These grips were made from an original Uberti/Navy Arms 32-20 revolver set of grips, which were carved from wood. The checkering shows the wood grain. It is a deeper and more widely spaced checkering than usual, and provides a very good grip for lighter recoiling guns. With a heavy recoil you may opt for a smooth grip which can slide through your hand and let the gun roll. The .45 Colt is pleasant enough to fire with these grips, whereas a 44 Magnum might be uncomfortable to some.

    Dimensions:
  • A (front vertical top section, height)= 7/8 inch
  • B (over-all height butt to top) = 2-15/16 inch
  • C (width of the base) = 2-1/16 inch
  • D (distance from center of front top to rear edge) = 1-1/2 inch
  • E (width of the flat on top) = 1 inch
If your gun has smaller grips, you can sand these down. But if your gun takes grips that are longer then 2-15/16 inches top to bottom, measured at right angle to the base, these are the wrong grips for it. Try the other set that looks just like this but is longer (taller) and wider at the butt.


Related Item(s)
Code Name Price Availability  
Colt_56a Colt SAA Factory w/Eagle (56a) $58.00  
Colt_94b Colt SAA (1873) Steer Head (94b) $58.00  
Colt_129b Colt SAA Stag 2pc (129b) $65.00  
Colt_28d Colt Frontier SAA Stag (28d) $65.00  
Colt_91a Colt SAA 1873 Smooth (91a) $58.00  
Colt_119a Colt SAA Stag 1-piece (119a) $65.00  
Colt_56d Colt SAA wide throat (56d) $58.00  
Colt_28F Colt Frontier SAA Stag, Larger (28F) $65.00  
Colt_112c Colt Cowboy SAA (112c) $58.00  
Colt_64e Colt/Uberti SAA 1-pc (64e) $58.00  
Colt_143d Colt 1873 Pietta Smooth (143d) $58.00  
Colt_119d Colt 1873 SAA Smooth (119d) $58.00  
Colt_7c Colt/Uberti 1873 SAA Stag (7c) $65.00  
Colt_143a Colt 1873 Smooth, Thin 3-pc (143a) $58.00  
Colt_37b Colt 1873 Wide Base (37b) $58.00  
Colt_81c Colt Generic 3-pc SA Smaller (81c) $58.00  
Colt_57a Colt Generic 3-pc SA Larger (57a) $58.00  
Colt_78a Colt Generic 3-pc SA Thick (78a) $58.00  
Colt_151a Generic Colt SA Blanks (151a) $38.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 45-60 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.


Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame!


Home Page Colors Pearl effects Example Guns Medallions