Tombstone Gun Grip Kits: www.TombstoneGrips.com - - Email: Dave@TombstoneGrips.com - - Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503

****** Flat rate shipping, all items on one order: Within USA, $11. Out of country, $45. ******

Store Front Account Search Product List Basket Contents Checkout
Optional Sign In:

Specials
A.J. Ordnance
American Arms
AMT
Ballester-Molina
Beretta
Bersa
Bond
Browning
Colt and Colt Replicas
Davis/Cobra
EAA
EMF
FEG
FIE
Freedom Arms
Great Western
Harrington & Richardson
Hawes
Heritage
Herter
High Standard
Hopkins & Allen
Hy Hunter
Iver Johnson
Jennings
Llama
Merwin & Hulbert
Nagant
Raven
Remington
Ruger
Herbert Schmidt
Savage
Sig_Sauer
Smith & Wesson
Star
Sterling Arms
Taurus
Other Manufacturers
Western Style Revolvers
Small Pocket Autos
Break Top Revolvers
Derringer
Other Automatics
Other Double Actions
Grip Caps
Butt Plates
Medallions
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware


Colt 1873 SAA Generic 1-pc (109G)
 
Colt 1873 SAA Generic 1-pc (109G) Quantity in Basket: None
Code: Colt_109G
Price: $58.00
Shipping Weight: 0.25 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (Ivory = default)

:
Translucent/Pearl ($16 option). Do NOT select both SOLID and PEARL. (Pearl over-rides solid color choice)

:
Select mounting style:
1-piece kit w/spacer
2 panels w/screw
Add a medallion ($14/pr)

:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. **************************************
NO. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable. *****************************************************
I already mailed a tracing BEFORE I placed this order.
Optional note:
 
Quantity:
 
This is yet another slightly different size of grip for the numerous Colt 1973 Single Action Army or Peacemaker clones, very few of which are exactly the same size in the grip frame as the original (but they LOOK the same until you get out the calipers and start measuring).

It is a kit of two panels and a spacer, so you can make a one-piece grip once they are fitted to your gun precisely with a little edge sanding. Sand the spacer to the exact width of the gun's frame, and epoxy glue it to the back of one panel per instructions sent with the grip. Then glue the other panel to the spacer, and you have a 1-piece grip that fits your gun perfectly.

You can also order this set with a screw mounting if you wish, and the screw will be installed for you. However, unless you send a pencil tracing on 3 x 5 index card of your existing grips, or of the gun's grip frame, with the screw hole location indicated, I can only mount the screw where the original Colt 2nd generation model grips have it. I have no idea if your clone has a different hole requirement due to the placement of the mainspring unless you send a tracing that either shows the hole location, or has an outline of the grip plus the open space inside it, around the spring.

To make a good tracing for a one-piece style grip, first remove the backstrap of the gun, and then remove the grip. Replace the backstrap with out the grip. Now, push the corner of a 3 x 5 index card into the top front corner of the grip frame, hold it firmly, and trace around the outside and the inside of the rest of the frame. Use a sharp pencil and get the tracing as close to the frame as you can.

If you make one tracing for each side of the frame, on separate cards, then I can cut them out and use them as two templates, which lets me cross check them for differences in drawing tolerance and choose a grip that will cover the widest part of them both.

Here is a link to a page about making tracings: TRACING.PDF

If you do not send a tracing, then be SURE to check these dimensions against your gun so you know the grip is large enough before you order: size diagram
  • Front edge length (A) = 1.07 inches
  • Overall height (B) = 3.25 inches
  • Width of base (C) = 2.3 inches
  • Center of front edge to rear edge (D) = 1.8 inches
  • Width of top edge (E) = 1 inch
  • Thickness at the base = 0.56 inches
  • Thickness near top = 0.365 inches
  • Screw hole (if selected) located per your tracing

Spacer mounting



Related Item(s)
Code Name Price Availability  
Colt_81c Colt Generic 3-pc SA Smaller (81c) $58.00  
Colt_57a Colt Generic 3-pc SA Larger (57a) $58.00  
Colt_78a Colt Generic 3-pc SA Thick (78a) $58.00  
Colt_151a Generic Colt SA Blanks (151a) $38.00  
Colt_130G Colt Generic SAA Smooth (130g) $58.00  

Dave Corbin Please Note: I make all the grips by hand and receive so many orders that custom made grip delivery takes an average 90 days.
Stock items (medallions, screws, specials) usually ship within 10 days.
I can't promise a specific ship date, as it will vary with circumstances.
If you can't wait, please don't order! I'm working as fast as possible.


Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Always compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame! Do NOT send your original grips or gun!


Home Page Colors Pearl effects Example Guns