Tombstone Gun Grip Kits: www.TombstoneGrips.com Email: Dave@TombstoneGrips.com Send tracings to: Tombstone Grips, PO Box 2171, White City, OR 97503
Store Front Account Search Product List Basket Contents Checkout
Optional Sign In

Specials
AMT
Ballester-Molina
Beretta
Bersa
Bond
Browning
Colt and Colt Replicas
Davis/Cobra
EAA
EMF
FIE
Freedom Arms
Great Western
Harrington & Richardson
Hawes
Heritage
Herter
High Standard
Hopkins & Allen
Iver Johnson
Jennings
Llama
Merwin & Hulbert
Nagant
Remington
Ruger
Ruger 22 Auto
Ruger Single Actions
Ruger DA Revolvers
Savage
Smith & Wesson
Star
Sterling Arms
Taurus
Other Manufacturers
Grip Caps
Butt Plates
Medallions
Blank Rectangles, Spacers, & Grips
Screws,  Mounting Hardware


Ruger GP100f/SP101 Panels (79b)
 
Ruger GP100f/SP101 Panels (79b) Quantity in Basket: None
Code: Ruger_79b
Price: $58.00
Shipping Weight: 0.20 pounds
 
Select SOLID color ($10). Natural Ivory is no extra cost. For pearl effects, use PEARL option instead (if none selected, you get ivory)

:
Select Pearl Effect ($16 option). Do NOT select both SOLID and PEARL. (If you do, the pearl will over-ride the solid color choice):
Select medallions ($14):
Screw Kit Options:
Yes, install the screw kit
No, just send screw kit uninstalled
Optional note:
Are you sending a tracing?:
YES! I want to assure proper size/shape. Tombstone is responsible for fit to tracing. Tracing will show hole pattern. If grip is smaller than tracing, it may be returned for exchange.
No. I will be responsible if I choose the wrong size grip. I will measure my gun and compare to the listed specs. If I order a grip that is the wrong size or shape, I agree that it is NOT returnable.
 
Quantity:
 
The Ruger GP100 with fixed sights uses this grip panel insert, as do several other Ruger firearms (SP101, for instance).

Important:
Be SURE to check the size and shape! Do not simply order by looking at the GP100 model number alone. There are two different sizes of grip insert panels. Some GP100's use the smaller panel and some use the larger one, which I list separately under the GP101. I don't know what you have: you can see it. Just compare size to avoid getting the wrong one!


To determine if your gun uses this size, check your existing grip panel measurements against these:

    RIGHT GRIP PANEL
  • Height, center of top through screw hole to base: 2-1/8 inch.
  • Width, across through screw hole: 1-1/16 inches.


    LEFT GRIP PANEL
  • Height, center of top to center of base: 2 inches
  • Width, across through screw hole: 1-1/16 inches.
  • Location of screw hole from front (trigger side) edge: 19/32 inch.
  • Height of screw hole at 90-degress from base: 1-7/8 inches.


There is a 1/2-inch OD x 1/8-inch deep locating hole with a center positioned 1/2-inch from the base, and 3/8-inch from the back edge. This leaves about 3/32 of an inch from the rear edge of the locating hole to the rear edge of the grip panel.

The original grip panels have a large mounting screw with a very large ferrule, which covers too much of the panel. These panels use a 0.2 inch diameter ferrule and nut, with a stainless steel screw. This is more than strong enough to hold the grips and panels on the gun, without covering up so much of the decorative panel surface.

These panels are smooth, not checkered. You can buff and polish them to a high finish with a buffer or wet and dry abrasive paper. They look especially nice with pearl, opal and other sparkling or color-shifting materials, in contrast with the black rubber grip body.

Please Note:
As with all Tombstone Grip Kits, these inserts are semi-finished so that you may wish to (a) polish them and/or (b) sand them to a different thickness, or sand to make them identical thickness.

The grip panel inserts NORMALLY don't need much finishing or sanding. But they are specifically sold as kits, rather than 100% finished. So if you want a higher polish or a different thickness, it should be clearly understood that this is up to you to do. Now that I've covered that, it's a fact that few people do more than buff the inserts a little, if that.

Black Opal GP100 Grip Panel Black Opal GP100 Grip Panel Black Opal GP100 Grip Panel Natural Ivory GP100 Grip Panel White Pearl GP100 Grip Panel Pink Pearl GP100 Grip Panel


Related Item(s)
Code Name Price Availability  
Ruger_135b Ruger GP101/GP100a panels (135b) $58.00  
Ruger_71c Ruger GP100f/SP101 Factory (71c) $58.00  

Please Note: I get so many orders every day that I am constantly 3-4 months backlogged.
If you cannot wait, please do not order! I'm working as fast as I can.
(Hardware, medallions, and specials are usually sent sooner, however.)


Be SURE to read the TERMS of SALE page, so you KNOW what you are getting.

Be SURE to compare listed measurements OR send a tracing of original grip or gun frame.
Do NOT order just by description, since the same model and make can vary in actual size and shape of grip frame!


Home Page Colors Pearl effects Example Guns Medallions