|
Colt 1860 Army (54a)
|
|
|
Quantity in Basket:
None
Code: Colt_54a
Price: $58.00
Shipping Weight: 0.20 pounds
|
|
This grip is for a long-framed revolver, the 1860 Colt
single action open top "Army" model (not the SAA 1873
cartridge model!). This gun was always made with a removable
back strap, to use 1-piece grips. You can order it with a
screw mount, if you wish.
As with all grips, but especially grips that are often put
on copies or "clones" built by Italian or German gunmakers
and marketed in the USA under other names, the actual size
and shape of any given grip frame may have very little in
common with the original gun, or with the next five boxes
containing the same make and model! Variation can be quite
extreme even on very nicely made guns. If you want to go
by the dimensions, and agree to be responsible for the size
of your gun being the same or slightly smaller in all
directions, that's fine. But if you want to send a tracing
or better yet, a template cut from heavy paper (such as
index card stock) that fits your gun just like you want the
back of the grip to fit it, that will shift the responsibility
for a good fit to me! I can only send what you order,
without a tracing or template to test the size. If you send
a template, I can hold it up to the back of the grip and
see if it matches. If not, I can email you and see what
you would like to do. If you put the dimensions on the
tracing, that helps me see if what you are measuring is
the same as what I measure on your tracing or template.
(I sometimes get a template that is 3.15 inches tall and
yet the dimensions given say it is 3.0 inches tall, and
maybe the grip being ordered has specs of 2.9 inches tall.
What do I believe, the tracing? ...the customer numbers? ...the size of the grip being ordered?
What I do is email and point out the three different sets
of specifications, and ask which is desired. Better to make
sure than to send the wrong size.)
Dimensions:
- Front edge length (A) 7/8 inches
- Over-all height (B) 3-3/8 inches
- Width of base (C) 2-1/4 inches
- Center of front straight back to rear edge (D) 1-3/4 inches
- Length of flat on top (E)1-1/4 inches
- Thickness (max) at base = 3/8 inch
- Thickness at top = 3/16 inch
|
Related Item(s)
Code
|
Name
|
Price
|
Availability
|
|
Colt_60c
|
Colt 1860 Army/Uberti O/S (60c)
|
$58.00
|
|
Colt_152e
|
Colt/Uberti 1860 Army, Large (152e)
|
$58.00
|
|
Colt_14F
|
Colt 1860 Army Clones (14F)
|
$58.00
|
|
|